Date   

Re: Flying Pig

Todd K7TFC
 

You can use 1/4 watt resistors (plenty of 4k7 at Radio Shack) if you can get the slightly-thicker leads through the pcb holes. You may also have to stand the resistor up.

Regarding T2, I think when each leg of the twisted-and-soldered pair goes through its own hole and back out the other hole--that counts as two "turns." In core-winding terms, every time a wire passes through a hole is a "turn." It doesn't have to wrap *around* the core to be a counted as a "turn." That's why I'm putting "turn" in quotes here. To be a bit clearer, take a toroid and just stick a straight wire through it . . . that's one "turn." Goofy, but conventional (as many conventions are).

Since Diz indicated a "turn" on these binocular cores is going through both holes, there's the *one* when you first insert the two legs, and then when you run each leg through the opposite hole (back to the twisted side), that's turn number *2*. According to the instructions, then, with 2 "turns" already on the core, you do that 6 more times.

 73,

Todd
------------------------------------------------------------------------------------
K7TFC / Medford, Oregon, USA / CN82ni / UTC-8
------------------------------------------------------------------------------------
QRP (CW & SSB) / EmComm / SOTA / Homebrew / Design


On Mon, Mar 11, 2013 at 7:35 AM, Graham <grahambloor@...> wrote:
 

Hi started my build on Sunday (10th) but ran into a snag , R2.3.16.26
: 4k7 ohm are missing ! and I have'nt any 1/8w res. in my junk box. And regarding T2 I thought 1 Turn plus 6 more makes not 7 not 8?
regards Graham G3UD 151



Only 13 days left to Pre-Register for OzarkCon

WA0ITP
 

There are only 13 days left to Pre-Register for OzarkCon 2013.

Don't miss out on the Midwest's premier QRP Conference. Register now
http://www.ozarkcon.com/Reg/RegisterForm2012.php Checkout the scheduled events
and our great speaker list http://www.ozarkcon.com/index.php Many items will
be for sale by individual hams and FB vendors. Take part in the build session
http://www.ozarkcon.com/BuildingWorkshop2013.html Have and eyeball QSO with
long time on the air friends.

Hope to see you in Branson on April 5 and 6.
----------------------------------
I love this radio stuff !
72 WA�ITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com


Hunt in the 40 acre woods!

Dale Putnam
 

The 40 acre hunt with NK6A and N0UR, Don and Jim, as Foxii will begin Tueday evening (local time) at the same local time as always..
so set your zulu  alarm clock to wake the zulu folks at 0100. That way they won't be late (r).   ;-)  
 
Good Luck to each and every one of us hounds.. and of course to the two FOXii...
 

May the Props be EVER in  YOUR favor!! 
 
 
--... ...-- Dale - WC7S in Wy
 
 


Re: Perfect pig rig accessory

Johnny AC0BQ
 

Come on warm wx I wanna try one of these 
Thanks Bert


On Monday, March 11, 2013, Robert wrote:
 

This antenna might be a good thing, for a 4sqrp net

<http://www.hamuniverse.com/supernvis.html>


Flying Pig

Graham
 

Hi started my build on Sunday (10th) but ran into a snag , R2.3.16.26
: 4k7 ohm are missing ! and I have'nt any 1/8w res. in my junk box. And regarding T2 I thought 1 Turn plus 6 more makes not 7 not 8?
regards Graham G3UD 151


Re: Perfect pig rig accessory

Walter - K5EST
 

GM Terry, my horiz loop is 20 ft high, and the reflector loop
is the same length 140 ft closed wire loop. The reflector
loop is just placed under the horiz loop. You can put an
air variable capacitor in the closed loop to do a fine
tuning, but unless you build a remote unit, I would say
just enjoy the simple wire antenna world.

You can also steer the super gain dipole by putting the
reflectors on the ground at the opposite side of the
dipole you want to direct the signal. Its a very inexpensive
great performing antenna. Just be aware the 50 ohm
is gone when the antennas get close to the ground.

73....Walter - K5EST



On Mon, Mar 11, 2013 at 8:33 AM, WA0ITP <wa0itp@...> wrote:
 



GM Walter,  is your reflector a loop also?  How high do you place the driven loop?
 
----------------------------------
I love this radio stuff !
72   WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com
 
 
----- Original Message -----
Sent: Monday, March 11, 2013 8:26 AM
Subject: Re: [4sqrp] Perfect pig rig accessory

The super gain works great! St Louis QRP has used one for years at field day.

Myself, I use a horizontal loop at low elevation. Adding a reflector laying on the ground will really make a difference.

73....Walter . K5EST

On Mar 11, 2013 6:09 AM, "Robert" <e1dslr@...> wrote:
 

This antenna might be a good thing, for a 4sqrp net

<http://www.hamuniverse.com/supernvis.html>



Re: Perfect pig rig accessory

WA0ITP
 


GM Walter,  is your reflector a loop also?  How high do you place the driven loop?
 
----------------------------------
I love this radio stuff !
72   WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com
 
 

----- Original Message -----
Sent: Monday, March 11, 2013 8:26 AM
Subject: Re: [4sqrp] Perfect pig rig accessory

The super gain works great! St Louis QRP has used one for years at field day.

Myself, I use a horizontal loop at low elevation. Adding a reflector laying on the ground will really make a difference.

73....Walter . K5EST

On Mar 11, 2013 6:09 AM, "Robert" <e1dslr@...> wrote:
 

This antenna might be a good thing, for a 4sqrp net

<http://www.hamuniverse.com/supernvis.html>


Re: Perfect pig rig accessory

Walter - K5EST
 

The super gain works great! St Louis QRP has used one for years at field day.

Myself, I use a horizontal loop at low elevation. Adding a reflector laying on the ground will really make a difference.

73....Walter . K5EST

On Mar 11, 2013 6:09 AM, "Robert" <e1dslr@...> wrote:
 

This antenna might be a good thing, for a 4sqrp net

<http://www.hamuniverse.com/supernvis.html>


Re: Perfect pig rig accessory

WA0ITP
 

I've worked Dave, NF�R on his Super-Gain. It seemed to work well on this end.
Joe, W�MQY has spearminted with it also.

----------------------------------
I love this radio stuff !
72 WA�ITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com

----- Original Message -----
From: "Robert" <e1dslr@gmail.com>
To: <4sqrp@yahoogroups.com>
Sent: Monday, March 11, 2013 6:09 AM
Subject: [4sqrp] Perfect pig rig accessory


| This antenna might be a good thing, for a 4sqrp net
|
|
| <http://www.hamuniverse.com/supernvis.html>
|
|
|
|
|
|
| ------------------------------------
|
| 4SQRP Website: http://4sqrp.com
| OzarkCon is coming April 5-6 in Branson, MO
| View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links
|
|
|


Perfect pig rig accessory

Robert
 

This antenna might be a good thing, for a 4sqrp net


<http://www.hamuniverse.com/supernvis.html>


Re: dual freq mod

Chuck Carpenter
 

Folks,

The dual crystal switch was used in a DC40 which uses only one frequency determining crystal. I did another one that switched 5 crystals and included a variable as a simple VXO.

Easy to do with only one crystal to switch. A little more difficult with two crystals as in the Rock-Mites. And not practical in rigs like the pig rig with 3 filter crystals on about the same frequency as TX/RX.



Chuck Carpenter, W5USJ
EM22cv, Rains Co. TX


Re: dual freq mod

John Lonigro
 

The dual frequency mod is cool, but WON'T work with the Pigrig, unless you want to switch in/out 4 crystals at a time.

72,

John AA0VE

On 03/10/2013 06:08 PM, Todd F. Carney / K7TFC wrote:
 

Thanks, John. Very cool. I'll bet something similar could be done with a rotary switch and several xtals (within the same portion of a band, at least).


73,

Todd
------------------------------------------------------------------------------------
K7TFC / Medford, Oregon, USA / CN82ni / UTC-8
------------------------------------------------------------------------------------
QRP (CW & SSB) / EmComm / SOTA / Homebrew / Design


On Sun, Mar 10, 2013 at 10:04 AM, John Hall <ka0kuy@...> wrote:
 
For those interested. I found this, http://www.qrpkits.com/files/DualXtalSwInfo.pdf at Hendricks QRP Kits.

73 John, KA0KUY



antenna issue found

Dg Arnholt <dgarnholt@...>
 

kinda thought it was that. still the kenwood shuting down is a mystery..i didnt think it had swr shut down.. hope the finals are ok. 
oh yeah the antenna problem simple :) wire touching a tree..gonna get a rope and pull it off and in the future get some help to move the antenna leg. i would cut the tree but this is rental property


Re: PIG RIG 104 is alive!

Scotty Long <nu0s@...>
 

No joy here in Nebraska I've been listening while building the K1 today.  Hope to see the pig rig in the mail soon oink oink...

72/73/Scotty/NUØS

Sent from my Verizon Wireless 4G LTE DROID


Jim Kortge wrote:

 

On 3/10/2013 3:08 PM, Johnny Matlock wrote:
> Pig Rig #104 came to life today!
> It has officially been broke in with by a Qso with Terry WA0ITP.
> Hope to have it in a proper Pig Pen soon!
> Thanks
> 72
> Johnny AC0BQ

Sorry I missed hearing you guys. I've had the SS-40 tuned to 7.0307
for the past several days listening for piggy activity. The only pig
rig that I've heard is George, W2BPI. He has been very solid here in
Fenton, normally S5 to S7.

72,

Jim, K8IQY


Re: PIG RIG 104 is alive!

Jim Kortge
 

On 3/10/2013 3:08 PM, Johnny Matlock wrote:
Pig Rig #104 came to life today!
It has officially been broke in with by a Qso with Terry WA0ITP.
Hope to have it in a proper Pig Pen soon!
Thanks
72
Johnny AC0BQ
Sorry I missed hearing you guys. I've had the SS-40 tuned to 7.0307 for the past several days listening for piggy activity. The only pig rig that I've heard is George, W2BPI. He has been very solid here in Fenton, normally S5 to S7.

72,

Jim, K8IQY


Re: dual freq mod

Todd K7TFC
 

Thanks, John. Very cool. I'll bet something similar could be done with a rotary switch and several xtals (within the same portion of a band, at least).

73,

Todd
------------------------------------------------------------------------------------
K7TFC / Medford, Oregon, USA / CN82ni / UTC-8
------------------------------------------------------------------------------------
QRP (CW & SSB) / EmComm / SOTA / Homebrew / Design


On Sun, Mar 10, 2013 at 10:04 AM, John Hall <ka0kuy@...> wrote:
 

For those interested. I found this, http://www.qrpkits.com/files/DualXtalSwInfo.pdf at Hendricks QRP Kits.

73 John, KA0KUY



Re: PIG RIG 104 is alive!

random.path
 

Great! My #147 board is all done except for needing a replacement L3 toroid, which is in the mail. His pigpen from ten-tec is flying this way too. I should have it up sometime this week.

Chip
AE5KA

--- In 4sqrp@yahoogroups.com, Johnny Matlock <jomatlock@...> wrote:

Pig Rig #104 came to life today!
It has officially been broke in with by a Qso with Terry WA0ITP.
Hope to have it in a proper Pig Pen soon!
Thanks
72
Johnny AC0BQ


PIG RIG 104 is alive!

Johnny AC0BQ
 

Pig Rig #104 came to life today!
It has officially been broke in with by a Qso with Terry WA0ITP.
Hope to have it in a proper Pig Pen soon!
Thanks
72
Johnny AC0BQ


Bill Kelsey - Kanga US

Dan Reynolds
 

I'm reposting this from the EMRFD group:
(I'm sure all of you know of Bill & KangaUS)

Bill Kelsey - Kanga US
Sat Mar 9, 2013 10:07 am (PST) . Posted by: "ken evans" w4du@bellsouth.net
I just spoke with Tina Kelsey (Bill's wife) and she informed me that Bill had a stroke yesterday (March 8). Right now the impact has been weakness in his right arm and leg and difficulty with speech and swallowing. His memory has not been impacted.

His was air lifted from Finely to Ohio State Medical Center in Columbus yesterday and is being treated there. Currently they are expecting time and treatment will yield a full recovery.

Tina has asked that people not email or telephone them until further notice. Kanga US will obviously be down for an undetermined amount off time. I will post any updates received.

Ken, W4DU


dual freq mod

John Hall
 

For those interested. I found this, http://www.qrpkits.com/files/DualXtalSwInfo.pdf at Hendricks QRP Kits.

73 John, KA0KUY