Date   
Wednesday Evening 40 and 80 meter Nets - Wed, 04/03/2019 8:00pm-9:00pm #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder:
Wednesday Evening 40 and 80 meter Nets

When:
Wednesday, 3 April 2019
8:00pm to 9:00pm
(GMT-05:00) America/Chicago

Where:
40 and 80 Meters

Organizer:
jomatlock@...

Description:
The 40 Meter Net will be at 8:00 pm central time  on 7.122 +-. QRM
NCS will be Bill KV6Z.

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday). 
The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operators are Johnny AC0BQ or Paul N0NBD.

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.

View Event

Just a reminder

dekle <dekle@...>
 

Hidden Oscillators

 

            At the conclusion of the prize drawings on Saturday I’m going to activate 2 small rf oscillators and hide them somewhere in or around the Stonecastle.

            They will be hidden in “common” areas that are accessible to anyone at any time. Nothing will have to be disassembled and nothing of any major consequence will have to be moved to locate them. They will be stationary and their retrieval will not require you to be in an unsafe situation.

            The oscillators are set to approximately 7116.59 kHz and 7120.96 kHz. They switch on for about 1.5 seconds and off for about the same amount of time. You will be able to hear them with your cw receiver. (Actually it’s possible to “hear” them with just a portable AM shortwave receiver but during the ‘on’ time it will just quiet the receiver and you won’t get the nice CW note without a BFO). I’ll let them run until someone finds them or until I have to leave on Sunday.

            The prizes this year will be $50 gift certificates from TAYDA.

 

 

Good luck.

 

73

Bill

KV6Z

 

Re: Inexpensive DMR

N5VMO Pat
 

Thank you David and Jim for the copy of the lastest GD-77 code plug for DMR in the area =)  I will distribute the copies around =)   MUCH THANKS TO ALL =)

--
73's Pat  N5VMO


Re: Scotland rescue by radio transmission

davemrtn <davemrtn@...>
 

Great article but it appears amateur radio played no part in this event.

David Martin - NA1MH - Mountain Home, Ar. -----------------------------------------
Wherever I go, there He is.
Recycle, Reuse, Re-purpose, Repair
>Professional Sports - An activity for small minds<
!! There is a reason it is called "Sports Trivia" !!

On 4/1/2019 08:59, Walter - K5EST wrote:
This is NOT April 1st joke.......

A Scottish Mountain Man Was Rescued—After His Distress Signal Was Picked Up in Houston. The distress call was from Scotland.  


or


73,

Walter Dufrain - K5EST - QRPcw
4 State QRP Group #40 - JARL QRP Club #845
Coordinator, Ozarkcon 2019
 An ARRL approved Specialty Operating Convention


Scotland rescue by radio transmission

Walter - K5EST
 

This is NOT April 1st joke.......

A Scottish Mountain Man Was Rescued—After His Distress Signal Was Picked Up in Houston. The distress call was from Scotland.  


or


73,

Walter Dufrain - K5EST - QRPcw
4 State QRP Group #40 - JARL QRP Club #845
Coordinator, Ozarkcon 2019
 An ARRL approved Specialty Operating Convention



Re: Inexpensive DMR

Jim Parks
 

David

 

Here is my current GD-77 code plug. You will have to put in your name and DMR number. Also notice that it does have a bunch of local LEO and fire/EMS freqs. In it. Just disregard those. Let me know if you have any questions about it. Also it is for a GD-77 with the latest firmware.

 

 

73

Jim Parks  NY0J

 

 

 

From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of N5VMO Pat
Sent: Sunday, March 31, 2019 8:12 PM
To: main@4sqrp.groups.io
Subject: Re: [4SQRP] Inexpensive DMR

 

Jim Parks  NY0J

I know you have moved on from the GD-77; but do you have a code plug for the latest version of that radio for KN / MO areas in a file =)   There are six of us around here new to DMR that have bought these radios =)   Can you help out =)

 

 

 

David,

 

Glad you for those “sea legs” I know the feeling. I started with a Radioddity GD77, then upgraded to the Anytone 868 and had to learn all over again, but I did it. For what it is worth, I have a great code plug for the Anytone that covers most of the DMR and analog repeaters for the western half of Missouri and I’m willing to share it with anyone who would like it.

 

 

73

Jim Parks  NY0J

 

 

 



--

73's Pat  N5VMO

Re: Inexpensive DMR

Jim Parks
 

Hi Chuck, the info for the two DMR repeaters in Branson is as follows:

 

UHF:  444.45 + Color Code 5  the 4SQRP talkgroup 31654 will be static on Time slot 1. This machine is located about 8 blocks from the hotel and has great hand-held coverage

 

VHF 147.150 + Color Code 5 the 4SQRP talkgroup 31654 will be static on Time slot 1. This machine is located NE of Branson and the coverage is somewhat less.

 

I posted a complete code plug for the Anytone 868 on the 4SQRP files section of the group. It is way too big to email.

 

Let me know if you have any more questions.

 

 

73

Jim Parks  NY0J

 

 

 

From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of Chuck Skolaut via Groups.Io
Sent: Sunday, March 31, 2019 7:22 PM
To: main@4SQRP.groups.io
Subject: Re: [4SQRP] Inexpensive DMR

 

Jim,

Can you send me the DMR info needed to program in the info for DMR operation in the Branson area for Ozarkcon? Someone sent the info several weeks ago but I can't locate it again. Having someone help me set up my Anytone 868 and would like to be able to use it while in the area.

73 and Thanks,

Chuck KØBOG

On Tuesday, February 19, 2019, 8:25:58 PM UTC, Jim Parks <jim.ny0j@...> wrote:

 

 

David,

 

Glad you for those “sea legs” I know the feeling. I started with a Radioddity GD77, then upgraded to the Anytone 868 and had to learn all over again, but I did it. For what it is worth, I have a great code plug for the Anytone that covers most of the DMR and analog repeaters for the western half of Missouri and I’m willing to share it with anyone who would like it.

 

 

73

Jim Parks  NY0J

 

 

 

From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of davemrtn
Sent: Tuesday, February 19, 2019 10:06 AM
To: main@4SQRP.groups.io
Subject: Re: [4SQRP] Inexpensive DMR

 

Jim,

I agree with you on the initial difficulty in understanding how to program DMR radios.

I was frustrated to no end when I started playing with a MD-380 and again later with the D868UV, but I kept plugging along, reading and trying things, finding what worked and what didn't.

Once I finally got my 'sea legs' so to speak, I am really enjoying what DMR and DMR networks have to offer for communication flexibility realizing of course the networking may not be something that can be relied on in a true disaster.

I have become quite comfortable programming codeplugs for the two radios I have.

David Martin - NA1MH - Mountain Home, Ar. -----------------------------------------
Wherever I go, there He is.
Recycle, Reuse, Re-purpose, Repair
>Professional Sports - An activity for small minds<
!! There is a reason it is called "Sports Trivia" !!

On 2/19/2019 09:16, Jim Parks wrote:

I agree completely with KB9BVN. Even a lot of experience hams are having issues understanding the DMR concept let alone the complexities of programming a radio. Most people off the street who manage to buy one of these from Amazon or WalMart won’t have a clue how to set it up. The only thing that has happened is the Chinese have been able to produce some great radios for very cheap prices and beat the traditional ham equipment mfgs. to the market. I think it is a great step forward in that it allows someone, especially new hams who may not be flush with money, to get on the air in a meaningful way without having to spend a bundle for a radio from Kenwood, Yaesu or Icom. Granted some of the Chinese stuff is junk but several of the DMR handhelds such as the Anytone 868 and 878 are just as good  quality-wise an anything from the traditional mfgs.

 

De NY0J

 

From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of KB9BVN -
Sent: Tuesday, February 19, 2019 8:37 AM
To: main@4sqrp.groups.io
Cc: 4SQRP@groups.io
Subject: Re: [4SQRP] Inexpensive DMR

 

Walt, 

 

As complex and intricate as DMR is to set up on one of these HT's...I would guess that's highly unlikely. 

As for me...I'm sticking to good old hand sent CW on HF. 

 

At least this Baofeng model is dual time slot...the other "DMR" rig they had was only single time slot...making it almost useless. 

 

de KB9BVN

 

 

 

 

On Tue, Feb 19, 2019 at 8:01 AM Walter - K5EST <walter.k5est@...> wrote:

((I am not advocating this company or a purchase))

 

Looking at R&L Electronics yesterday and today they are advertising a DMR Baofeng DM-1801 for $54.95! REALLY! 

 

Google search of the DM-1801 shows even WalMart is selling them among a large number of vendors.

 

Not raining on anyone's parade, but is DMR going to be the next CB radio?  

 

73,

Walter Dufrain - K5EST - Coordinator OzarkCon 2019

 An ARRL approved Specialty Operating Convention


 


 

--

73 de KB9BVN
Brian Murrey

Re: Inexpensive DMR

N5VMO Pat
 

Jim Parks  NY0J
I know you have moved on from the GD-77; but do you have a code plug for the latest version of that radio for KN / MO areas in a file =)   There are six of us around here new to DMR that have bought these radios =)   Can you help out =)



David,

 

Glad you for those “sea legs” I know the feeling. I started with a Radioddity GD77, then upgraded to the Anytone 868 and had to learn all over again, but I did it. For what it is worth, I have a great code plug for the Anytone that covers most of the DMR and analog repeaters for the western half of Missouri and I’m willing to share it with anyone who would like it.

 

 

73

Jim Parks  NY0J

 

 

 



--
73's Pat  N5VMO


Re: Learning KiCad at Ozarkcon

Jeff Logullo N0̸MII
 

I’ll try to bring a few memory sticks w/ the download(s) on them...

On Mar 31, 2019, at 6:39 PM, cornhusker via Groups.Io <cornhusker@...> wrote:

The Windows version of this software is a 1.1 GB download.  Be sure to download it at home and/or on the fastest connection you can get.  I am installing it on my laptop.  
73 de K0NEB



--
Jeff N0̷MII

Re: Inexpensive DMR

Chuck Skolaut
 

Jim,

Can you send me the DMR info needed to program in the info for DMR operation in the Branson area for Ozarkcon? Someone sent the info several weeks ago but I can't locate it again. Having someone help me set up my Anytone 868 and would like to be able to use it while in the area.

73 and Thanks,

Chuck KØBOG


On Tuesday, February 19, 2019, 8:25:58 PM UTC, Jim Parks <jim.ny0j@...> wrote:


David,

 

Glad you for those “sea legs” I know the feeling. I started with a Radioddity GD77, then upgraded to the Anytone 868 and had to learn all over again, but I did it. For what it is worth, I have a great code plug for the Anytone that covers most of the DMR and analog repeaters for the western half of Missouri and I’m willing to share it with anyone who would like it.

 

 

73

Jim Parks  NY0J

 

 

 

From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of davemrtn
Sent: Tuesday, February 19, 2019 10:06 AM
To: main@4SQRP.groups.io
Subject: Re: [4SQRP] Inexpensive DMR

 

Jim,

I agree with you on the initial difficulty in understanding how to program DMR radios.

I was frustrated to no end when I started playing with a MD-380 and again later with the D868UV, but I kept plugging along, reading and trying things, finding what worked and what didn't.

Once I finally got my 'sea legs' so to speak, I am really enjoying what DMR and DMR networks have to offer for communication flexibility realizing of course the networking may not be something that can be relied on in a true disaster.

I have become quite comfortable programming codeplugs for the two radios I have.

David Martin - NA1MH - Mountain Home, Ar. -----------------------------------------
Wherever I go, there He is.
Recycle, Reuse, Re-purpose, Repair
>Professional Sports - An activity for small minds<
!! There is a reason it is called "Sports Trivia" !!

On 2/19/2019 09:16, Jim Parks wrote:

I agree completely with KB9BVN. Even a lot of experience hams are having issues understanding the DMR concept let alone the complexities of programming a radio. Most people off the street who manage to buy one of these from Amazon or WalMart won’t have a clue how to set it up. The only thing that has happened is the Chinese have been able to produce some great radios for very cheap prices and beat the traditional ham equipment mfgs. to the market. I think it is a great step forward in that it allows someone, especially new hams who may not be flush with money, to get on the air in a meaningful way without having to spend a bundle for a radio from Kenwood, Yaesu or Icom. Granted some of the Chinese stuff is junk but several of the DMR handhelds such as the Anytone 868 and 878 are just as good  quality-wise an anything from the traditional mfgs.

 

De NY0J

 

From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of KB9BVN -
Sent: Tuesday, February 19, 2019 8:37 AM
To: main@4sqrp.groups.io
Cc: 4SQRP@groups.io
Subject: Re: [4SQRP] Inexpensive DMR

 

Walt, 

 

As complex and intricate as DMR is to set up on one of these HT's...I would guess that's highly unlikely. 

As for me...I'm sticking to good old hand sent CW on HF. 

 

At least this Baofeng model is dual time slot...the other "DMR" rig they had was only single time slot...making it almost useless. 

 

de KB9BVN

 

 

 

 

On Tue, Feb 19, 2019 at 8:01 AM Walter - K5EST <walter.k5est@...> wrote:

((I am not advocating this company or a purchase))

 

Looking at R&L Electronics yesterday and today they are advertising a DMR Baofeng DM-1801 for $54.95! REALLY! 

 

Google search of the DM-1801 shows even WalMart is selling them among a large number of vendors.

 

Not raining on anyone's parade, but is DMR going to be the next CB radio?  

 

73,

Walter Dufrain - K5EST - Coordinator OzarkCon 2019

 An ARRL approved Specialty Operating Convention


 


 

--

73 de KB9BVN
Brian Murrey

Re: Learning KiCad at Ozarkcon

cornhusker
 

The Windows version of this software is a 1.1 GB download.  Be sure to download it at home and/or on the fastest connection you can get.  I am installing it on my laptop.  
73 de K0NEB


Learning KiCad at Ozarkcon

Walter - K5EST
 

Hi Everyone, at Ozarkcon this year is a really great chance to learn how to use 
KiCad for making professional PCB layouts and 3D printing for your cabinets for radio gear! 

KiCad works for SMD or THT (thru the hole) components, ground planes, and lots of other great features. KiCad is as easy to use for schematic capture, PCB layout and it even gives a 3D rendering of the assembled board. PCB are easy to order direct from China. Download KiCad (see below) and bring along your pc; we'll work on a project together.

KiCad now has a push and shove router which is capable of routing differential pairs and interactively. 
tuning trace lengths.

3D printing is a very cool new technology that kids are learning in middle and high school to make small cabinets, paddles for keyers, etc.  Download and install FreeCad to follow along. Working with 3D is not as difficult at you think.

Barry Buelow - WØIY has 2 time sections of learning this great software for 
us at Ozarkcon. Bring your laptops to follow along with the presentations.

You can download KiCad for free at http://kicad-pcb.org/

What computer OS do you use? Can I use my computer?
Here is the page that gives the info: http://kicad-pcb.org/download/
AND for you Chromebook owners, yes it is possible to run KiCad,

Will KiCad get me away from dead-bug construction? Well, it sure has
a good chance of me changing my ancient ways :-)

Here is a link to FreeCad:      https://www.freecadweb.org/

See you all at Branson.......it's gonna be fun!

Walter Dufrain - K5EST - QRPcw
4 State QRP Group #40 - JARL QRP Club #845
Coordinator, Ozarkcon 2019
 An ARRL approved Specialty Operating Convention



Re: WX predictions for Ozarkcon/Branson

Tim N9PUZ
 

I'd like to see those occasional Thunderstorms go away on Thursday. Could make SOTA adventures challenging!

Tim N9PUZ

On 03/31/19 07:27, Walter - K5EST wrote:
Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so much better than last year's! https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616

Thursday  Hi - 63   Lo - 50 F
Friday       Hi - 67   Lo - 46 F
Saturday   Hi - 70   Lo - 55 F
Sunday     Hi - 67   Lo - 58 F

Ozarkcon is going to be fun......see you there!

Re: WX predictions for Ozarkcon/Branson

Paul Smith
 

COOL wx, Did'nt it snow on us a couple times?
de PAUL

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Sent: Sunday, March 31, 2019 3:06 PM
To: main@4sqrp.groups.io
Subject: Re: [4SQRP] WX predictions for Ozarkcon/Branson
 
Wonderful News!
Nice spring weather for a change.
Cu all at Ozarkcon!
Johnny AC0BQ 

On Sun, Mar 31, 2019 at 10:01 AM Tom Sevart <tmsevart@...> wrote:
On 03/31/19 07:27, Walter - K5EST wrote:
> Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so
> much better than last year's!
> https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616
>
> Thursday  Hi - 63   Lo - 50 F
> Friday       Hi - 67   Lo - 46 F
> Saturday   Hi - 70   Lo - 55 F
> Sunday     Hi - 67   Lo - 58 F
>
> Ozarkcon is going to be fun......see you there!
>

Great news!  I'm totally tired of winter.

--
Tom Sevart N2UHC
St. Paul, KS




--
Check out the 4SQRP website at 4sqrp.com

Re: WX predictions for Ozarkcon/Branson

Johnny AC0BQ
 

Wonderful News!
Nice spring weather for a change.
Cu all at Ozarkcon!
Johnny AC0BQ 

On Sun, Mar 31, 2019 at 10:01 AM Tom Sevart <tmsevart@...> wrote:
On 03/31/19 07:27, Walter - K5EST wrote:
> Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so
> much better than last year's!
> https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616
>
> Thursday  Hi - 63   Lo - 50 F
> Friday       Hi - 67   Lo - 46 F
> Saturday   Hi - 70   Lo - 55 F
> Sunday     Hi - 67   Lo - 58 F
>
> Ozarkcon is going to be fun......see you there!
>

Great news!  I'm totally tired of winter.

--
Tom Sevart N2UHC
St. Paul, KS




--
Check out the 4SQRP website at 4sqrp.com

Re: WX predictions for Ozarkcon/Branson

Tom Sevart
 

On 03/31/19 07:27, Walter - K5EST wrote:
Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so much better than last year's! https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616
Thursday  Hi - 63   Lo - 50 F
Friday       Hi - 67   Lo - 46 F
Saturday   Hi - 70   Lo - 55 F
Sunday     Hi - 67   Lo - 58 F
Ozarkcon is going to be fun......see you there!
Great news! I'm totally tired of winter.

--
Tom Sevart N2UHC
St. Paul, KS

WX predictions for Ozarkcon/Branson

Walter - K5EST
 

Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so much better than last year's!  https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616

Thursday  Hi - 63   Lo - 50 F
Friday       Hi - 67   Lo - 46 F
Saturday   Hi - 70   Lo - 55 F
Sunday     Hi - 67   Lo - 58 F

Ozarkcon is going to be fun......see you there!

Walter Dufrain - K5EST - QRPcw
4 State QRP Group #40 - JARL QRP Club #845
Coordinator, Ozarkcon 2019
 An ARRL approved Specialty Operating Convention



Re: Getting good to go ...

W6BOW
 

Tom K0AMD,

For me the mini60 has been a most helpful addition to my "test bench".
Some years ago I built a 30 Meter station - Xmtr/Rcvr - based on circuits drawn from ARRL's "Solid State Design, for the Radio Amateur" by the venerable Wes Hayward, W7ZOI and Doug DeMaw, W1FB.
My most advanced piece of test gear at that time was the Heath Kit  solid state dip meter. 

I find the mini60 helpful for a variety of purposes not least for adjusting my antenna(s) to minimum SWR at their feed points. After that I use a tuner to match the coax/balanced line at the xmtr output. 
The mini60 battery life doesn't seem great. Just be mindful to have it fully charged before you "climb the ladder".


(While on this subject I have a question. I can adjust my antenna (trim the length/experiment with counterpoise length and positioning) to achieve quite acceptable SWR levels of 2:1 or lower. Using my tuner at the rig I can lower the SWR to 1:1. Signals sound stronger when I bypass the tuner but is that due to noise and not signal levels. Sometimes my power output reads higher than when I bypass the tuner to the antenna directly.)  When does it matter and when does it not matter when/if I bypass the tuner. Why?)


So much sophisticated yet reasonably priced tools are available these days. I own a Tektronix 2430 scope which I purchased a few years ago for "cheap" on e-Bay. I haven't found the time yet to fire it up. Looking through the adds for modern day test gear (at reasonable prices new) I've wondered if it would be worth breaking out the old 2430. Why not go for a current and quite possibly more accurate and with many more "bells and whistles" test "appliance"? 

There is a lot to be said (not everything mind you) for simplicity. QRP operation is a prime example. It allows us to get down and dirty with the fundamentals of the art and science of radio. That's why I will attempt to get my 2430 up and running. Even if I fail I'll still have learned a lot in the process. Maybe the mini60 has been out there long enough now to make them widely/cheaply available used. If you've never used an antenna analyzer before, this could be your opportunity. I haven't even used many of my mini60 features yet including interfacing with a computer. 

These are just one ham's personal opinions. Goals not imperatives. Ham Radio is a river broad and deep. We stand on the shoulders of giants whomever we are and regardless of our expertise.

73

Don-W6BOW
San Francisco CA  USA


 

-----Original Message-----
From: Thomas Martin <tem494@...>
To: main <main@4sqrp.groups.io>
Sent: Sat, Mar 30, 2019 6:05 pm
Subject: Re: [4SQRP] Getting good to go ...

Don
You have a picture with the mini60 antenna analyzer what do you think of it.

Tom 
K0amd


On Mar 30, 2019, at 7:41 PM, Brian Crittendon via Groups.Io <aaa5mi@...> wrote:

I Still have my PM1. Bought it when my Dad made me sell my tube rig because the electric bill doubled. I was WN8IOP back in 71.

On Saturday, March 30, 2019, 6:53:54 PM EDT, W6BOW via Groups.Io <DBuckter@...> wrote:


Dear All,

Attached find pics of my work in progress portable Hilltopper 20 setup.

I think I got a call from a station in Hawaii earlier today running the HT20 to a 6' all band mobile antenna at ground level in front of the QTH.
He/she was very faint. Can't wait to get out and about portable in more DX favorable locals.

I've had more than passing success working back East /Mid-West/South-East/ and North to Alaska using my all bander doublet.

I'm impressed by the steadily growing interest in QRP (I started with the Tent\Tec PM1. Remember that seminal rig?) over the years and in spite of propagation's vagaries .  
I am coming to appreciate how much depends upon what is or is not happening on the Sun and/or up in the ionosphere.

I'll be QRT for three weeks while on R&R (Rest and Reunion with XYL's family) in Thailand.

CU next year in Branson I hope.

73 

Don - W6BOW
San Francisco  CA  USA

Re: Getting good to go ...

Thomas Martin
 

Don
You have a picture with the mini60 antenna analyzer what do you think of it.

Tom 
K0amd


On Mar 30, 2019, at 7:41 PM, Brian Crittendon via Groups.Io <aaa5mi@...> wrote:

I Still have my PM1. Bought it when my Dad made me sell my tube rig because the electric bill doubled. I was WN8IOP back in 71.

On Saturday, March 30, 2019, 6:53:54 PM EDT, W6BOW via Groups.Io <DBuckter@...> wrote:


Dear All,

Attached find pics of my work in progress portable Hilltopper 20 setup.

I think I got a call from a station in Hawaii earlier today running the HT20 to a 6' all band mobile antenna at ground level in front of the QTH.
He/she was very faint. Can't wait to get out and about portable in more DX favorable locals.

I've had more than passing success working back East /Mid-West/South-East/ and North to Alaska using my all bander doublet.

I'm impressed by the steadily growing interest in QRP (I started with the Tent\Tec PM1. Remember that seminal rig?) over the years and in spite of propagation's vagaries .  
I am coming to appreciate how much depends upon what is or is not happening on the Sun and/or up in the ionosphere.

I'll be QRT for three weeks while on R&R (Rest and Reunion with XYL's family) in Thailand.

CU next year in Branson I hope.

73 

Don - W6BOW
San Francisco  CA  USA

Re: Getting good to go ...

W6BOW
 

Good for you Brian for conserving your PM1. Wish I had mine. 


-----Original Message-----
From: Brian Crittendon via Groups.Io <aaa5mi@...>
To: main <main@4SQRP.groups.io>
Sent: Sat, Mar 30, 2019 5:42 pm
Subject: Re: [4SQRP] Getting good to go ...

I Still have my PM1. Bought it when my Dad made me sell my tube rig because the electric bill doubled. I was WN8IOP back in 71.

On Saturday, March 30, 2019, 6:53:54 PM EDT, W6BOW via Groups.Io <DBuckter@...> wrote:


Dear All,

Attached find pics of my work in progress portable Hilltopper 20 setup.

I think I got a call from a station in Hawaii earlier today running the HT20 to a 6' all band mobile antenna at ground level in front of the QTH.
He/she was very faint. Can't wait to get out and about portable in more DX favorable locals.

I've had more than passing success working back East /Mid-West/South-East/ and North to Alaska using my all bander doublet.

I'm impressed by the steadily growing interest in QRP (I started with the Tent\Tec PM1. Remember that seminal rig?) over the years and in spite of propagation's vagaries .  
I am coming to appreciate how much depends upon what is or is not happening on the Sun and/or up in the ionosphere.

I'll be QRT for three weeks while on R&R (Rest and Reunion with XYL's family) in Thailand.

CU next year in Branson I hope.

73 

Don - W6BOW
San Francisco  CA  USA