|
Re: 80 meter Net
Yes That might help Brian. The big wire way up in the air is working too good!! 72 Johnny AC0BQ
On Wed, May 22, 2019 at 9:39 PM Brian Crittendon via Groups.Io <aaa5mi=yahoo.com@groups.io> wrote:
--
Check out the 4SQRP website at 4sqrp.com
|
|
|
|
TOINIGHT'S 4SQRP DMR NET
Robert
THANKS TO ALL THOSE THAT CHECKED IN AND I HOPE EVERYONE STAYS SAFE AND DRY DURING THIS CRAZY SPRING WEATHER.
TONIGHT'S CHECK INS N9PUZ TIM NK80 CHARLES N0TGR DICK W4RK BILL WG5F ED N0SO MIKE AC0BQ JOHNNY WA0ITP TERRY K0VAB VIC 73'S BERT N0YJ
|
|
|
|
Re: 80 meter Net
Brian Crittendon
Time for under ground or on the ground receive antenna.
On Wednesday, May 22, 2019, 9:45:57 PM EDT, Paul Smith <n0nbd@...> wrote:
Hello Johnny, ur signals were nearly ESP here I could almost hear terry, The thunder just started cul de Paul
Sent from Outlook From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Sent: Thursday, May 23, 2019 1:43 AM To: main@4sqrp.groups.io Subject: Re: [4SQRP] 80 meter Net Hello Paul
I thought that was you trying, but I couldn’t get a complete call, sorry!
The two brave souls that got in over my BIG qrn level were
N0NBD PAUL
and
W0ITP TERRY
I have to give Paul, WA9PWP
credit for trying.
My QRN was bouncing between 7 and 9.
I’m not sure QRO would have worked Tonight?
72
Johnny AC0BQ
On Wed, May 22, 2019 at 8:39 PM Paul Goemans <wa9pwp@...> wrote:
Check out the 4SQRP website at
4sqrp.com
|
|
|
|
Re: 80 meter Net
Paul Smith
Hello Johnny, ur signals were nearly ESP here I could almost hear terry, The thunder just started cul de Paul
Sent from Outlook
From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Sent: Thursday, May 23, 2019 1:43 AM To: main@4sqrp.groups.io Subject: Re: [4SQRP] 80 meter Net Hello Paul
I thought that was you trying, but I couldn’t get a complete call, sorry!
The two brave souls that got in over my BIG qrn level were
N0NBD PAUL
and
W0ITP TERRY
I have to give Paul, WA9PWP
credit for trying.
My QRN was bouncing between 7 and 9.
I’m not sure QRO would have worked Tonight?
72
Johnny AC0BQ
On Wed, May 22, 2019 at 8:39 PM Paul Goemans <wa9pwp@...> wrote:
Check out the 4SQRP website at
4sqrp.com
|
|
|
|
Re: 80 meter Net
Hello Paul I thought that was you trying, but I couldn’t get a complete call, sorry! The two brave souls that got in over my BIG qrn level were N0NBD PAUL and W0ITP TERRY I have to give Paul, WA9PWP credit for trying. My QRN was bouncing between 7 and 9. I’m not sure QRO would have worked Tonight? 72 Johnny AC0BQ
On Wed, May 22, 2019 at 8:39 PM Paul Goemans <wa9pwp@...> wrote:
--
Check out the 4SQRP website at 4sqrp.com
|
|
|
|
Re: 80 meter Net
Paul Goemans
Well,
You got a couple. I was the other one trying..
Paul
Goemans WA9PWP
Stoughton, WI
From: Paul
Smith
Sent: Wednesday, May 22, 2019 8:25 PM
To: 4SQRP@groups.io ; main@4SQRP.groups.io
Subject: Re: [4SQRP] 80 meter Net I have S9+ here in HUmboldt
N0NBD
Sent from Outlook From: main@4SQRP.groups.io
<main@4SQRP.groups.io> on behalf of Johnny Matlock
<jomatlock@...>
Sent: Thursday, May 23, 2019 1:23 AM To: 4SQRP@groups.io Subject: [4SQRP] 80 meter Net Ge Group
I will try to call the 80 meter Net @8:30 central DST time.
I hope I can hear you?
My qrn is terrible S7 with higher peaks.
72
Johnny AC0BQ -- Check out the 4SQRP website at 4sqrp.com
|
|
|
|
Re: 80 meter Net
AG1P Ron
A friend east of KC emailed me that he was headed for the bathtub - Severe T-storm and tornado warnings. Will be noisy condx. I have S7 noise with faint static crashes here in OR 72 - Ron - AG1P
From: main@4SQRP.groups.io [mailto:main@4SQRP.groups.io] On Behalf Of Paul Smith
Sent: Wednesday, May 22, 2019 6:26 PM To: 4SQRP@groups.io; main@4SQRP.groups.io Subject: Re: [4SQRP] 80 meter Net
I have S9+ here in HUmboldt N0NBD
Sent from Outlook From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Ge Group I will try to call the 80 meter Net @8:30 central DST time. I hope I can hear you? My qrn is terrible S7 with higher peaks. 72 Johnny AC0BQ -- Check out the 4SQRP website at 4sqrp.com
|
|
|
|
Re: 80 meter Net
Paul Smith
toggle quoted messageShow quoted text
From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Sent: Thursday, May 23, 2019 1:23 AM To: 4SQRP@groups.io Subject: [4SQRP] 80 meter Net Ge Group
I will try to call the 80 meter Net @8:30 central DST time.
I hope I can hear you?
My qrn is terrible S7 with higher peaks.
72
Johnny AC0BQ
-- Check out the 4SQRP website at
4sqrp.com
|
|
|
|
80 meter Net
Ge Group I will try to call the 80 meter Net @8:30 central DST time. I hope I can hear you? My qrn is terrible S7 with higher peaks. 72 Johnny AC0BQ -- Check out the 4SQRP website at 4sqrp.com
|
|
|
|
Wednesday Evening 40 and 80 meter Nets - Wed, 05/22/2019
#cal-notice
main@4SQRP.groups.io Calendar <noreply@...>
Wednesday Evening 40 and 80 meter Nets When: Where: Organizer: Description:
|
|
|
|
Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 05/22/2019 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 22 May 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net will be at 8:00 pm central time on 7.122 +-. QRM
|
|
|
|
Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 05/22/2019 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 22 May 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net will be at 8:00 pm central time on 7.122 +-. QRM
|
|
|
|
Re: VXO /parts/ Xmtr /Parts (Missed the kits !)
k9ut2003
Curt, thanks for the info, i do remember years ago when i was going to build the 2n2222 rig as i was building stuff then with the cu pads ! Got lazy and got a K2 ! Hi ! Now its all coming back !
Thanks , 73,
Jerry K9UT
-----Original Message-----
From: Curt via Groups.Io <wb8yyy@...> To: main <main@4SQRP.groups.io> Sent: Mon, May 20, 2019 5:11 pm Subject: Re: [4SQRP] VXO /parts/ Xmtr /Parts (Missed the kits !) Jerry
For the final, examine some designs that use a pair of 2n2222 or 2n2219 devices in parallel (note a small resistor a few ohms in each emitter leg) - check K8IQY designs for ideas on the PA circuit. idea is to use what you have or can find. Certainly research QRP VCXO on the web should bring some hits. sometimes a few identical (or close value) crystals are used in parallel - but okay to start simple with one device. 'Famous QRP rigs that used a VCXO? The 38 special used a high frequency xtal (to tune about half of 30m) and mixed down. uMountaineer by K7ZOI had a frequency shift function to hop between two images or transmit on two frequencies. cool stuff! enjoy your build Curt
|
|
|
|
Re: OT AEA MT-1 Code Trainer Manual
Thank you to everyone. It wasn’t 30 minutes from the time I sent the query that I had two accurate respondents. What a world this hobby opens up.
toggle quoted messageShow quoted text
The little AEA MT-1 code generator is ancient, sat on someones shelf for years, but still works and has some of the best sounding CW I have every heard from a code generator. It only sends letters, numbers and punctuation (no words) but it got me over the 20 WPM hump for my Extra 25+ years ago...... just listening to it made my old heart get that warm feeling....... just like doing CW on my also ancient Argonaut 515. Thanks again Guys! Dave K8WPE David J. Wilcox K8WPE’s iPad
On May 21, 2019, at 12:08 AM, John Parker <parkjv1@...> wrote:
|
|
|
|
Re: OT AEA MT-1 Code Trainer
Dave, I just got home! sorry, I have the MM-1. John WH6DQU
On Mon, May 20, 2019 at 12:33 PM Paul Goemans <wa9pwp@...> wrote:
|
|
|
|
Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 05/22/2019 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 22 May 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net will be at 8:00 pm central time on 7.122 +-. QRM
|
|
|
|
Re: Banner Updated
marjannorm
Hi gang, yep, a GREAT Banner. Please keep up the great work!
Norm vk5gi McLaren Vale South Australia
|
|
|
|
Re: VXO /parts/ Xmtr /Parts (Missed the kits !)
Curt
Jerry
For the final, examine some designs that use a pair of 2n2222 or 2n2219 devices in parallel (note a small resistor a few ohms in each emitter leg) - check K8IQY designs for ideas on the PA circuit. idea is to use what you have or can find. Certainly research QRP VCXO on the web should bring some hits. sometimes a few identical (or close value) crystals are used in parallel - but okay to start simple with one device. 'Famous QRP rigs that used a VCXO? The 38 special used a high frequency xtal (to tune about half of 30m) and mixed down. uMountaineer by K7ZOI had a frequency shift function to hop between two images or transmit on two frequencies. cool stuff! enjoy your build Curt
|
|
|
|
Re: VXO /parts/ Xmtr /Parts (Missed the kits !)
k9ut2003
Lou, congrats om, thats great ! I am trying now to find the final Xsistor, MPS U02 , kinda rare ! HI ! looks like a neat project i have the article in the qrp classics mag ! i would be ok with 1.5 watts ! I never run more than 50 with the K2 ,then 5 on qrp tests !
guess i could find a alternate if necessary ,anyway i will start looking for some other parts !
Thanks again , 73
Jerry
-----Original Message-----
From: Louis Nix via Groups.Io <louis.nix@...> To: main <main@4SQRP.groups.io> Sent: Mon, May 20, 2019 4:11 pm Subject: Re: [4SQRP] VXO /parts/ Xmtr /Parts (Missed the kits !) I made that one several years ago and used a transistor radio caoacitor (polycon) for VXO. I built it in a cheese dip can! No chirp at all. People were amazed by how good the signals sounded. Also, check out WI5W, Randy, and the "Rockbender" transmitter and receiver.
|
|
|
|
Re: VXO /parts/ Xmtr /Parts (Missed the kits !)
k9ut2003
-----Original Message-----
From: Louis Nix via Groups.Io <louis.nix@...> To: main <main@4SQRP.groups.io> Sent: Mon, May 20, 2019 4:11 pm Subject: Re: [4SQRP] VXO /parts/ Xmtr /Parts (Missed the kits !) I made that one several years ago and used a transistor radio caoacitor (polycon) for VXO. I built it in a cheese dip can! No chirp at all. People were amazed by how good the signals sounded. Also, check out WI5W, Randy, and the "Rockbender" transmitter and receiver.
|
|
|