Date   

Re: QCX-20 meter

Charles W. Powell
 

Pat - N5VMO has spoken for the QCX-20.

Thanks for the bandwidth.

Charles - NK8O


Re: DMR Talkgroup

Dan Reynolds
 

I would be very interested in this. 
--
Dan Reynolds -- KB9JLO
<><


Re: QCX-20 meter

N5VMO Pat
 

Sorry Charles I see it includes the case as well =) I'm In for the
OCX-20 w/ case for $100 Shipped USPS =) can I have you mailing address
to mail the money too =) I get paid Next Wednesday =) Thanks a
bunch and look forward to operating the QRP rig =)

--

*73's Pat N5VMO*


Re: DMR Talkgroup

Robert
 

great work chas, and I believe it will be used

73's

Bert N0YJ

DMR# 3120435


On 9/13/2018 6:21 PM, Charles W. Powell via Groups.Io wrote:
We were unable to get a DMR Talk Group in KS or MO because all of the assignments are made and these states have no more available. But we have members in Iowa, Wisconsin, Minnesota, Oklahoma, and several others. Chuck Kraly, K0XM, is looking into what is available in our neighboring states.  I asked if there was a hardware requirement and he said no, because the TG exists on the Brandmeister servers.  So let's see what happens!  If we get this, we will need to USE it!

On a different note, watch our e-mails from this group.  I think Yahoo! decided it was junk and I have had a terrible time getting it to go to my inbox.

72,

Chas - NK8O


Re: QCX-20 meter

N5VMO Pat
 

Charles does the OCX-20 come with the case =)
On 9/13/18, Charles W. Powell via Groups.Io
<doctorcwp=yahoo.com@groups.io> wrote:
For sale: QCX-20, assembled, recommended mods in place, working, with
Bamatech case. $100 shipped USPS to US. Dare I say it? I won't say "too
many radios," but should I say excess to my needs?

72,

Charles - NK8O




--

*73's Pat N5VMO*


Re: 40m Net

Karl Schwab
 

Thanks Bill, I did attempt to QNI with you last night, and as you went along, your signal faded away here in Michigan.  I'll give 'er a go with you next week, thanks for the NCS.  73, de Karl, KO8S, MI

On Wed, Sep 12, 2018 at 9:57 PM dekle <dekle@...> wrote:
A little skimpy on the QNIs tonight but got a few:

K3NLT     Russ     VA
K3ESE    Lloyd     MD
KO8S      Karl       MI (he got on the list but didn't come back)

Thanks all, C U next time
73
Bill
KV6Z


QCX-20 meter

Charles W. Powell
 

For sale: QCX-20, assembled, recommended mods in place, working, with Bamatech case.  $100 shipped USPS to US.   Dare I say it? I won't say "too many radios," but should I say excess to my needs?

72,

Charles - NK8O


Re: DMR Talkgroup

Johnny AC0BQ
 

Thanks Chas
This sounds interesting.


On Thu, Sep 13, 2018 at 6:21 PM Charles W. Powell via Groups.Io <doctorcwp=yahoo.com@groups.io> wrote:
We were unable to get a DMR Talk Group in KS or MO because all of the assignments are made and these states have no more available. But we have members in Iowa, Wisconsin, Minnesota, Oklahoma, and several others. Chuck Kraly, K0XM, is looking into what is available in our neighboring states.  I asked if there was a hardware requirement and he said no, because the TG exists on the Brandmeister servers.  So let's see what happens!  If we get this, we will need to USE it!

On a different note, watch our e-mails from this group.  I think Yahoo! decided it was junk and I have had a terrible time getting it to go to my inbox.

72,

Chas - NK8O

--
Check out the 4SQRP website at 4sqrp.com


DMR Talkgroup

Charles W. Powell
 

We were unable to get a DMR Talk Group in KS or MO because all of the assignments are made and these states have no more available. But we have members in Iowa, Wisconsin, Minnesota, Oklahoma, and several others. Chuck Kraly, K0XM, is looking into what is available in our neighboring states.  I asked if there was a hardware requirement and he said no, because the TG exists on the Brandmeister servers.  So let's see what happens!  If we get this, we will need to USE it!

On a different note, watch our e-mails from this group.  I think Yahoo! decided it was junk and I have had a terrible time getting it to go to my inbox.

72,

Chas - NK8O


Re: 80 Meter Net

Johnny AC0BQ
 

Sorry Dale
I wish I could have worked you.
I knew my signal were falling somewhere?
72
Johnny AC0BQ 

On Thu, Sep 13, 2018 at 3:00 PM K4EQ <dale@...> wrote:
Johnny, you were strong into the St. Louis area. KB6V beat me to the punch when you first called the net, then our dog came begging for her evening walk. Since I didn't know the true urgency of her barking, I elected to accommodate her desire and miss the net. I like dry carpet. Hi!
--
Dale, K4EQ
www.k4eq.net

--
Check out the 4SQRP website at 4sqrp.com


Re: Hilltopper 20 for sale

Bill VanKirk
 

The Hilltopper 20 has been sold. Thanks to all who were interested.

Bill
W0PT


Re: 40m Net

Wayne Steury
 

I tried my best to copy the net and could not. Maybe next time! N9EGT 


On Sep 13, 2018, at 3:46 PM, w2sh@... wrote:

At no time during the summer was reception of this net as awful as last night.  KV6Z was barely 229.  Also the skip was shorter than usual.  Let's hope the autumnal equinox will improve things.


72,


Charles (aka Chas), W2SH




From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of dekle <dekle@...>
Sent: Wednesday, September 12, 2018 9:57 PM
To: main@4SQRP.groups.io
Subject: [4SQRP] 40m Net
 
A little skimpy on the QNIs tonight but got a few:

K3NLT     Russ     VA
K3ESE    Lloyd     MD
KO8S      Karl       MI (he got on the list but didn't come back)

Thanks all, C U next time
73
Bill
KV6Z


Hilltopper 20 for sale

Bill VanKirk
 

I have a Hilltopper 20 that I finished building about 3 weeks ago. It works great and in like new condition. I will ship it for $85.

Bill
W0PT


Re: 80 Meter Net

K4EQ
 

Johnny, you were strong into the St. Louis area. KB6V beat me to the punch when you first called the net, then our dog came begging for her evening walk. Since I didn't know the true urgency of her barking, I elected to accommodate her desire and miss the net. I like dry carpet. Hi!
--
Dale, K4EQ
www.k4eq.net


Re: 40m Net

w2sh@...
 

At no time during the summer was reception of this net as awful as last night.  KV6Z was barely 229.  Also the skip was shorter than usual.  Let's hope the autumnal equinox will improve things.


72,


Charles (aka Chas), W2SH




From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of dekle <dekle@...>
Sent: Wednesday, September 12, 2018 9:57 PM
To: main@4SQRP.groups.io
Subject: [4SQRP] 40m Net
 
A little skimpy on the QNIs tonight but got a few:

K3NLT     Russ     VA
K3ESE    Lloyd     MD
KO8S      Karl       MI (he got on the list but didn't come back)

Thanks all, C U next time
73
Bill
KV6Z


40m Net

dekle <dekle@...>
 

A little skimpy on the QNIs tonight but got a few:

K3NLT     Russ     VA
K3ESE    Lloyd     MD
KO8S      Karl       MI (he got on the list but didn't come back)

Thanks all, C U next time
73
Bill
KV6Z


80 Meter Net

Johnny AC0BQ
 

Ge Group
When I first tuned up on 80 meters 
and my QRN was a strong s7, I thought the Net was going to be a rain out.

Well I was wrong!

Check in’s tonight we’re:
KV6Z
N0NBD
WA0ITP
RELAY FOR K3ESE via KB6Z
and 
W2SH
Thanks everyone, it was fun.
72
Johnny AC0BQ 
--
Check out the 4SQRP website at 4sqrp.com


Wednesday Evening 40 and 80 meter Nets - Wed, 9/12/18 #cal-notice

main@4SQRP.groups.io Calendar <noreply@...>
 

Wednesday Evening 40 and 80 meter Nets

When:
Wednesday, 12 September 2018
8:00pm to 9:00pm
(GMT-05:00) America/Chicago

Where:
40 and 80 Meters

Description:
The 40 Meter Net will be at 8:00 pm central or 0100 UTC on 7.122 +-.
NCS will be Bill KV6Z.

Wednesday evening 80 Meter CW Net. will be at 0130 UTC Thursday (8:30PM Central Time Wednesday). 
The net will be called on 3.564 MHz +/- QRM.



Net control operators are Johnny AC0BQ or Paul N0NBD.


Re: How to make a PCB mill

Rob Roberts
 

I just skimmed the article and saw that PCB thread a week or so ago and thought it would be handy!


Rob

K0RLR

Rob Roberts - AMSOIL Dealer
Discover Something New About AMSOIL


On Sep 12, 2018, at 11:26 AM, Don Pitchford <donw9ebk@...> wrote:

Rob,
Thanks for the link to the article. The good news; it seems very useful. The bad news; it looks like reading your post may cost me $150 and a bunch of time at the workbench. I think I need one of these.
Thanks,
Don, W9EBK

On Wed, Sep 12, 2018 at 7:05 AM Rob Roberts via Groups.Io <kd0wkv=yahoo.com@groups.io> wrote:
Saw this article about turning a cheap engraver into a decent PCB mill, thought I’d share the wealth.


https://hackaday.com/2018/09/12/turning-a-cheap-engraver-into-a-decent-pcb-mill/

Rob Roberts - AMSOIL Dealer
Discover Something New About AMSOIL
(217) 919-7319


QRP Quarterly Deadline September 15

Mike Malone
 

If you have something for the QQ, please email it to me direct at kd5kxf@...

Mike KD5KXF 
Editor

7061 - 7080 of 25075