Good evening group

Bert is out if town tonight, I will call the DMR nets at 8:00 pm central dst time.

73

Johnny ACØBQ

On Wed, Sep 30, 2020 at 3:00 PM main@4SQRP.groups.io Calendar <main@4sqrp.groups.io> wrote:

Reminder: Wednesday Evening 40 and 80 meter Nets

When:





Wednesday, 30 September 2020, 20:00 to 21:00,



(GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer:



jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm central time  on 7.122 +-. QRM
NCS is WQ5RP/ACØBQ 

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday). 

The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny ACØBQ 

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.

--

Check out the 4SQRP website at 4sqrp.com

On 9/26/2020 4:28 PM, Jerry Brown wrote:
> AM for 30-40 mHz.

Correct.   The HT-1E and HT-2 (the one shown in the original post) were
AM transceivers, the HT-2 having an additional VHF converter that
allowed it to hear AM transmissions from the aircraft band.    I
converted a pair of them to 6 meter AM many years ago and used them at
hamfests.   As-is they would slide down to 10 meters but I wanted 6
meters which was a lot more work.  The problem nowadays is finding
crystals or a substitute that will fit in the housings.

Cool cold war relics along with the rest of the Village Radio series
that turn up from time to time when a warehouse is cleaned out.

73, Bob W9RAN

Thanks Jim

I appreciate you digging into this.

I am trying to key my Kx3 for the upcoming NAQACC N3A event.

I was thinking that it required two port connections, but I couldn’t figure out how to do that?

The little interface would still be a great asset on a simpler QRP rig.

Thanks again

73

Johnny ACØBQ 

On Sat, Sep 26, 2020 at 11:48 AM n5ib_2 <n5ib@...> wrote:

Update:   it's amazing what you can learn just by "doing your homework"    :^))



Scott (N3FJP) has in fact already implemented an "almost as good" feature for sending CW over the CAT connection to the Elecraft rigs (and others that support a similar feature, like the Icom 7600 and 7610)



In the CW transmit settings, if the function key stored messages are prefixed with "RI:" then the characters that follow will be sent over the active CAT link as command(s) rather than used as text to key the transmitter over a separate keying link.



See the Elecraft KIO2 programmer's reference, page 9:

<https://ftp.elecraft.com/K2/Manuals%20Downloads/KIO2%20Pgmrs%20Ref%20rev%20E.pdf>



and N3FJP's CW transmit settings instructions (quoted below):

".....

With version 1.1, I have added the ability to play saved CW strings stored in your rig (for rigs equipped with this feature).  To send a command to your rig instead of sending the string, precede the text with RI:.  For example, when placed in an F key string, the following will trigger the Icom 7300 and Icom 7610 internally recorded voice messages: (you must have rig interface enabled and be connected by a com port)......"



For example, if the F4 key is loaded with "RI:SW16;SW08;" then pressing the F4 key will send the message stored in the K2's message memory #1.

  the SW16;  simulates a tap of the MSG button, and the SW08; simulates tapping the "1" button.



In like manner...

"RI:SW16;SW09;"  sends memory #2,  "RI:SW16;SW10;"  sends #3 and so on.



So in one swell foop [sic] I've almost obsoleted my wired USB keying interface     LOL    and designated the wireless BlueTooth CAT link as a the keying interface.



What is lost in the scheme is the ability to auto-insert callsigns, serial numbers, etc into a stored message. So Scott still owes us some midnight oil...       Break's Over, Scott!!       LOL



Jim, N5IB

Update: it's amazing what you can learn just by "doing your homework" :^))

Scott (N3FJP) has in fact already implemented an "almost as good" feature for sending CW over the CAT connection to the Elecraft rigs (and others that support a similar feature, like the Icom 7600 and 7610)

In the CW transmit settings, if the function key stored messages are prefixed with "RI:" then the characters that follow will be sent over the active CAT link as command(s) rather than used as text to key the transmitter over a separate keying link.

See the Elecraft KIO2 programmer's reference, page 9:
<https://ftp.elecraft.com/K2/Manuals%20Downloads/KIO2%20Pgmrs%20Ref%20rev%20E.pdf>;

and N3FJP's CW transmit settings instructions (quoted below):
".....
With version 1.1, I have added the ability to play saved CW strings stored in your rig (for rigs equipped with this feature). To send a command to your rig instead of sending the string, precede the text with RI:. For example, when placed in an F key string, the following will trigger the Icom 7300 and Icom 7610 internally recorded voice messages: (you must have rig interface enabled and be connected by a com port)......"

For example, if the F4 key is loaded with "RI:SW16;SW08;" then pressing the F4 key will send the message stored in the K2's message memory #1.
the SW16; simulates a tap of the MSG button, and the SW08; simulates tapping the "1" button.

In like manner...
"RI:SW16;SW09;" sends memory #2, "RI:SW16;SW10;" sends #3 and so on.

So in one swell foop [sic] I've almost obsoleted my wired USB keying interface LOL and designated the wireless BlueTooth CAT link as a the keying interface.

What is lost in the scheme is the ability to auto-insert callsigns, serial numbers, etc into a stored message. So Scott still owes us some midnight oil... Break's Over, Scott!! LOL

Jim, N5IB