Date   

Re: Bayou Jumper Power Supply

David Walker
 

Current Requirements: Receiver 20-25 mA, Transmitter less than 600 mA






On 2/10/2021 11:19 AM, Bob Parr wrote:

Others can correct me if I am wrong, but I don't think it uses anywhere near 3 amps.
 
Bob


> My BY jumper will mostly be used in the shack.  I have a 'wall
> wart" whose output is rated at 12V and 3.5A. Someone said the
> amperage might not be enough to power the transmitter.  I can't
> find any information, so I am asking this group.  Can I use it to
> both receive and transmit? 


Re: Bayou Jumper Power Supply

Bob Parr
 

Others can correct me if I am wrong, but I don't think it uses anywhere near 3 amps.
 
Bob


> My BY jumper will mostly be used in the shack.  I have a 'wall
> wart" whose output is rated at 12V and 3.5A. Someone said the
> amperage might not be enough to power the transmitter.  I can't
> find any information, so I am asking this group.  Can I use it to
> both receive and transmit? 


Re: Bayou Jumper Power Supply

William Fogel
 

On Wed, Feb 10, 2021 at 11:06 AM, William Fogel wrote:
My BY jumper will mostly be used in the shack.  I have a 'wall wart" whose output is rated at 12V and 3.5A. Someone said the amperage might not be enough to power the transmitter.  I can't find any information, so I am asking this group.  Can I use it to both receive and transmit? 
Posted to wrong group , reposted to BY jumper subgroup. Sorry.  


Bayou Jumper Power Supply

William Fogel
 

My BY jumper will mostly be used in the shack.  I have a 'wall wart" whose output is rated at 12V and 3.5A. Someone said the amperage might not be enough to power the transmitter.  I can't find any information, so I am asking this group.  Can I use it to both receive and transmit? 


Re: ISO Knob help!

Thomas Martin
 

Dopro Pack of 12 Flat Top Guitar Chicken Head Knob AMP Effect pointer Knob Bronze
This came from the Amazon website they also have some other "Chicken head knobs" listed 
tom
 

On Wed, Feb 10, 2021 at 10:53 AM nm0s_qrp <nm0s@...> wrote:
Hey, does anyone in this group have a source for press-on-style chicken head knobs to fit a 6mm split, splined shaft?


Re: ISO Knob help!

cornhusker
 

https://www.parts-express.com/Chicken-Head-Vintage-Amp-Knob-Black-240-2214


On Wed, Feb 10, 2021 at 10:53 AM, nm0s_qrp
<nm0s@...> wrote:
Hey, does anyone in this group have a source for press-on-style chicken head knobs to fit a 6mm split, splined shaft?


ISO Knob help!

nm0s_qrp
 

Hey, does anyone in this group have a source for press-on-style chicken head knobs to fit a 6mm split, splined shaft?


Wednesday Evening 40 and 80 meter Nets - Wed, 02/10/2021 20:00-21:00 #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 10 February 2021, 20:00 to 21:00, (GMT-06:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm central time  on 7.122 +-. QRM
NCS is WQ5RP/ACØBQ 

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday). 



The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny ACØBQ 

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Re: Bayou Jumper kit

W6BOW
 

Gary,

Congratulations on your breakout BJ contacts. Good things take time.

Very much enjoyed your writing and the enthusiasm it clearly communicated.

73

Don    W6BOW


-----Original Message-----
From: Gary E. Kohtala via groups.io <gary.k7ek@...>
To: BayouJumperKit@4sqrp.groups.io <bayoujumperkit@4sqrp.groups.io>; main@4sqrp.groups.io <main@4sqrp.groups.io>; main@4SQRP.groups.io <main@4SQRP.groups.io>
Sent: Sun, Jan 31, 2021 4:08 pm
Subject: Re: [4SQRP] Bayou Jumper kit

Propagation finally smiled upon me. Today I made my first ever contacts
with my recently completed BJ. The first one was with KB5ILL in Louisiana.
He was 599. I received a 559. George was running 100w to my approximately 
5w.  Next up was N0YJ in Kansas. We were 559 both ways. Bert was also
running a BJ. That was my first ever BJ to BJ contact! Same for Bert
as I recollect.  I had to endure loud SSB interference during both contacts
but luckily I was able to tune to the opposite side with a good result.
I did not start making contacts until I hooked up my 4SQRP tuner.
It's amazing how much difference that little black box made once I
got it all tuned up. 

I need to get some more crystal adapters so as to be able to use some
of the other frequencies in my collection. I really like the Cajun
crystal adaptors. That's an innovative concept. The 7030 crystal currently
comes out on 7028.2 and the 7122 is 7120.2. That's pretty far off of
the published frequencies. I'm going to try rubbering the crystals to
get them closer to 7030 and 7122. The wide nature of the receiver does
help to hear some stations that are not exactly on your frequency.
Reminds me of my Novice days when I only had two rocks. I would call long CQ's,
and then slowly tune the entire band for calls. 

Somewhere in the fray I believe I heard a KL1 or KL1G something or other.
Unfortunately the signal faded and SSB monkey chatter took over so I
cannot confirm.

I must congratulate 4SQRP for a very innovative and novel radio kit.
I enjoyed building and troubleshooting this rig. I learned a lot
in the process. I am very appreciative of everyone's efforts. Thanks
for all that you do to keep ham radio interesting. The payoff was after
I made that first contact. Interestingly, I did have an incomplete contact a half hour
or so before the first good ones. I guess my signal was being overwhelmed by
fading so we never got a legitimate two way for the log. That was another
N0 station.

Good luck to all with your BJ 40's. I look forward to making contacts with
you in the future.  Now all we need is the Souper Upper to make the Bayou Jumper
an even better rig. Emoji

Stay safe and warm.

Best regards,

Gary, K7EK





On Sunday, January 24, 2021, 05:39:04 PM EST, Johnny AC0BQ <jomatlock@...> wrote:


Hello Gary
Sorry for your troubles.
After you get the coil moved, look for the oblivious stuff, missed joint, part in the wrong hole etc.

Then run the numbers on the voltage chart in the manual.
I replied with the sub group for bayou jumpers in my email.
Join up with it please.
It’s a sub group of the club.
We can give you one on one help 
Over there.
72
Johnny ACØBQ 


On Sun, Jan 24, 2021 at 4:27 PM Gary E. Kohtala via groups.io <gary.k7ek=yahoo.com@groups.io> wrote:

I finished my kit but ran into problems with the receiver. All I get is Brother Stair's AM shortwave
broadcast blasting through. The audio becomes louder as I turn the Attenuator to the right. Regen does
nothing, nor does tuning. I must have goofed somewhere. I am going to remove the toroid and reinstall it
on the bottom vice the top of the board. Although it can go in either location, I found it very difficult
to adjust the turns spacing as installed. So I will step back, take a breath, and reinstall the toroid
on the bottom in a day or so. I've been a ham since 1967 and do not knowingly remember building and/or
using a regen type receiver. Now 54 years later I must digress and learn about them.. :-).

The transmitter on the other hand is quite amazing. It works very well and puts out a whopping signal.
I was quite amazed. I've been jumping between 7030 and 7122 calling CQ's from time to time while listening
on one of my big rigs. I'm getting responses and seeing posts on RBN with great signals, despite horrid
band conditions.

On a more positive note, I did manage to get the prescribed small wooden box at my local Hobby Lobby. It
was the last one. I was unsure whether or not the board would fit so I had to make a second trip with the
board to actually place it into the box. Bingo! Perfect. $9 and some change and I am all set. Now I just
need to get the receiver working.

Question:  Are additional crystal adaptor boards available? If so, from where and how much? I would like
to buy 5-6 more as I have a handful of additional crystals I'd like to use with the BJ 40.

Happy new year, and please stay safe...

Best regards,

Gary, K7EK

--
Check out the 4SQRP website at 4sqrp.com


Wednesday Evening 40 and 80 meter Nets - Wed, 02/10/2021 20:00-21:00 #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 10 February 2021, 20:00 to 21:00, (GMT-06:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm central time  on 7.122 +-. QRM
NCS is WQ5RP/ACØBQ 

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday). 



The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny ACØBQ 

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Re: FYBO Saturday February 6, 2020

W1ND
 

Thank you Robert,

I read the quote to my wife before she left for work.  She laughed at the “cold ...souls” reference.

Not sure I did anything extraordinary here though.  Just out having fun.


Re: Cricket 40 Crystal Source

Wayne Steury
 

I like KC9ON.com for $1 crystals. The short ones work best for me

Wayne Steury N9EGT 

On Feb 8, 2021, at 12:02 AM, Jim Pruitt <jpruitt67@...> wrote:

 Have you checked KC9ON's web page:
https://kc9on.com/product-category/crystals/

https://kc9on.com/product/7-8mhz-hc49u-tall-crystals/

This bunch has 7060 in its list:
https://kc9on.com/product/7-8mhz-hc49s-short-crystals/

Jim Pruitt
WA7DUY







On 2/7/2021 6:31 AM, Dave Burnett wrote:
Is anyone able to provide a source of additional crystals for the Cricket 40?  I'd like to have one for somewhere around 7060-7064 and maybe a few more.  I've looked on the WTL website but I must be missing something.

72,
-Dave
WD8KRV


Re: Cricket 40 Crystal Source

OwlCricker - K7ULM
 

Thanks, great resource.
- - - - - - - - - - - - - - - - - - -
Dick Wendell - K7ULM
406-781-1333

If you don't know Morse Code,
You don't know dit.


On Mon, Feb 8, 2021 at 12:02 AM Jim Pruitt <jpruitt67@...> wrote:
Have you checked KC9ON's web page:
https://kc9on.com/product-category/crystals/

https://kc9on.com/product/7-8mhz-hc49u-tall-crystals/

This bunch has 7060 in its list:
https://kc9on.com/product/7-8mhz-hc49s-short-crystals/

Jim Pruitt
WA7DUY







On 2/7/2021 6:31 AM, Dave Burnett wrote:
Is anyone able to provide a source of additional crystals for the Cricket 40?  I'd like to have one for somewhere around 7060-7064 and maybe a few more.  I've looked on the WTL website but I must be missing something.

72,
-Dave
WD8KRV


Re: Cricket 40 Crystal Source

Jim Pruitt
 

On 2/7/2021 6:31 AM, Dave Burnett wrote:
Is anyone able to provide a source of additional crystals for the Cricket 40?  I'd like to have one for somewhere around 7060-7064 and maybe a few more.  I've looked on the WTL website but I must be missing something.

72,
-Dave
WD8KRV


Re: Cricket 40 Crystal Source

Curt
 

Bobby

Those were the two xtal sources I was thinking of. I remember only using 2 xtals with my para80set, so 2 may be enough for a novel fun rig.

Been a while since I recalled ceramic vxo, yes if a stash of useful resonators could be found, even a stand alone vxo kit would be interesting. Many apps would do well with 20 some kHz of tuning.

Heard you with a nice skcc signal on 40m today but it was dinnertime.

73 curt wb8yyy


Re: Cricket 40 Crystal Source

Bobby Drummond
 


Also, once you've used your Cricket for a while consider using a ceramic resonator (or better yet, two in parallel) along with a 22 uh inductor and variable capacitor in place of the crystal.  That would be a VXO that would allow you to use the Cricket in just about any part of the CW portion of the 40 meter band if you were to select a ceramic resonator in the neighborhood of around 7.2 MHz or so.

Yes, it would require some relatively extensive modifications to the Cricket but it's doable and would allow you much more flexibility with the Cricket.  With a little creativity and effort, you will be greatly rewarded.   (Kit designers of 4State QRP kits- please consider making some future simple transmitters using VXOs and ceramic resonators. I think there would be enough interest that it would be worth the effort)

For info about VXOs with ceramic resonators, just use a search engine and put in "VXO using ceramic resonator" and you should find plenty of information.

73 de AK4JA

On Sun, Feb 7, 2021 at 11:11 AM John - KK4ITX via groups.io <jleahy00=yahoo.com@groups.io> wrote:
In addition to the others mentioned:



--
73 de AK4JA


Re: FYBO Saturday February 6, 2020

Charles W. Powell
 

Brave, but crazy.  I'm more of a 45F or warmer kind of guy!

Chas - NK8O

On 2/7/21 6:31 AM, W1ND wrote:

I sure did (Freeze My Butt Off, that is).

Good fun up here in Maine.



-=Glen=-


Re: FYBO Saturday February 6, 2020

griffithsesq.robert
 

Glen. As I recently quoted to a valiant 4SQRP kit builder on the Bayou Jumper sub-Reflector:

“The credit belongs to the man who is actually in the arena. Who’s face is marred by dust and sweat and blood. Who knows the great enthusiasm, the great devotion. Who spends himself in a worthy cause. Who in the end at best knows the triumph of high achievement and at worst fails while doing greatly. So that his face shall never be among those cold and timid souls who know neither victory nor defeat.” Theodore Roosevelt

Disregard the “cold ... souls” reference in the quote. I suppose that, in your case, “Freeze My Butt, Off,” at least equals being “marred by dust and sweat and blood”. Congratulations, well done and to use another T.R., “Bully for you!” (and for and to all of those QRP Types who venture out there “in a worthy cause.”
73. Griff NE3I

Robert Alan Griffiths


Re: Cricket 40 Crystal Source

John - KK4ITX
 

In addition to the others mentioned:


Re: Cricket 40 Crystal Source

Jim Long
 

1041 - 1060 of 24802