Date   

Re: FD reports comments?

Rick Bennett
 

So many ways to slice it.  There is also the height above average terrain, HAAT as defined by the FCC (https://www.fcc.gov/encyclopedia/antenna-height-above-average-terrain-haat-calculator).  

I prefer simple, if you are standing on a big hill and you can see a long ways out than you are "purty high".  (-:

de KC0PET, Rick



From: "Robert Schmedake weaselradio1@... [4sqrp]" <4sqrp@...>
To: 4sqrp@..., "David Martin" , "Nick Kennedy"
Sent: Thursday, July 2, 2015 1:19:21 PM
Subject: Re: [4sqrp] Re: FD reports comments?

 

I'm guessing MSL too. AGL when you are standing on a mountaintop is 0 ft. Pilots worry about how much altitude above things that can smite you. So a 14,000 ft peak is 14,000 MSL and 0 AGL if you stand on it. :-)



On Thursday, July 2, 2015 11:39 AM, "'Nick Kennedy' nick-wa5bdu@... [4sqrp]" <4sqrp@...> wrote:


 
Well, I’m not a pilot but some searches indicate I probably meant AMSL or MSL (above mean sea level) as that’s what I was referring to.  The terrain below the the mountain is at about 360’ above seal level, so I was at about 1440’ above ground level I suppose.
 
It’s interesting – I was building a barometer / altimeter a couple years ago using an Ardunio and a pressure transducer.  My source for local barometric pressure to calibrate the thing against were my local power plant which has a computer point I can access and the local airport.  I couldn’t get them to square up even after correcting for minor differences in elevation.  I finally found out that the airport reports the barometric pressure as what it would be if you relocated the airport to New Orleans.  Ha!  They correct it to what the pressure would be at sea level.
 
Yes Phil, there was beer.  At least in my case.  We have a mixture of guys who partake and guys who don’t.  I have to be careful though or I’ll sleep the whole night away.  I managed to get in only about two hours of sleep, so I guess I didn’t over-indulge.
 
73-
 
Nick, WA5BDU
 
 
Sent: Thursday, July 02, 2015 10:49 AM
Subject: Re: [4sqrp] Re: FD reports comments?
 
 
Did you mean AGL or MSL ?

On 7/2/2015 8:24 AM, 'Nick Kennedy' nick-wa5bdu@... [4sqrp] wrote:
 
This was a different Field Day for me.  For the past several decades, I’ve been part of the local club’s effort and usually one half of a two-man team running the CW station.
 
This time, several (eight) old guys who had been QSO partners in the 60s, about 50 years ago, decided to get together for an old friends FD.  Two flew down from Oregon but most came from various locations in Arkansas.
 
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH.  Far from roughing it, we rented two cabins and had the comforts.  My station was outside though.  We ran two 100 watt CW stations, each using 130 foot dipoles fed with ladder line.  They seemed to do a great job.  We used K5ALU, the call of one of our members.
 
We managed 2350 QSOs, about 50 of them on 6 meters and the rest divided between the two HF CW stations.  The weather was excellent and the bugs were few.  Great Field Day.
 
73-
 
Nick, WA5BDU

--
David Martin - K5DCM
Mountain Home, Ar.
-+-+-+-+-+-+-+-+-+-+-
"It's only "work" if you'd rather be doing something else" - Dean Kamen

SCOTUS has legalized perversion, and heathens are celebrating.





Re: FS: SS40TX/RX Transceiver (Built & tested)

bobby rolph
 

Have you sold the SS40 yet Jim?
KB4QNR
Bobby


On Fri, Jul 3, 2015 at 8:52 AM, 'Jim Sheldon' w0eb@... [4sqrp] <4sqrp@...> wrote:
 

Still available for sale:  Completely built and tested SS40RX/TX in a Circuit Specialists cabinet.  Frequency range as built is 7.016 through 7.039 MHz.  It's putting out a measured 6.8 watts into a 50 ohm dummy load.  The receiver is the older SS40, but the TX has been fully and properly integrated.  It does very close to full QSK switching.  The receiver is really hot, with the minimum discernable signal a measured -132 dBm.  I've added the Freq-Mite freq counter and the RF connector on the back is an SO-239.  There is also an on-off toggle switch on the back panel.  Forgot to mention in the earlier post that I also have the crystals to put it up around the 7.122 area so you could either change them out or use AA0BQ's switching arrangement to make a dual freq set up.
 
Asking $130 for the whole package, shipped anywhere in the US.  PayPal preferred but I will take a US Postal Service money order.
 
Please email me off the reflector to ask for further info or to tell me you want it.  First "I'll take it" determined by time of receipt of the email gets right of first refusal.
 
Jim Sheldon, W0EB
2029 East Evanston Dr.
Park City, KS 67219-1618
 
 
 
  
 
 



FS: SS40TX/RX Transceiver (Built & tested)

Jim Sheldon
 

Still available for sale:  Completely built and tested SS40RX/TX in a Circuit Specialists cabinet.  Frequency range as built is 7.016 through 7.039 MHz.  It's putting out a measured 6.8 watts into a 50 ohm dummy load.  The receiver is the older SS40, but the TX has been fully and properly integrated.  It does very close to full QSK switching.  The receiver is really hot, with the minimum discernable signal a measured -132 dBm.  I've added the Freq-Mite freq counter and the RF connector on the back is an SO-239.  There is also an on-off toggle switch on the back panel.  Forgot to mention in the earlier post that I also have the crystals to put it up around the 7.122 area so you could either change them out or use AA0BQ's switching arrangement to make a dual freq set up.
 
Asking $130 for the whole package, shipped anywhere in the US.  PayPal preferred but I will take a US Postal Service money order.
 
Please email me off the reflector to ask for further info or to tell me you want it.  First "I'll take it" determined by time of receipt of the email gets right of first refusal.
 
Jim Sheldon, W0EB
2029 East Evanston Dr.
Park City, KS 67219-1618
 
Tel: 316-744-3022
 
 
  
 
 


Re: FD reports comments?

Robert Schmedake <weaselradio1@...>
 

I'm guessing MSL too. AGL when you are standing on a mountaintop is 0 ft. Pilots worry about how much altitude above things that can smite you. So a 14,000 ft peak is 14,000 MSL and 0 AGL if you stand on it. :-)



On Thursday, July 2, 2015 11:39 AM, "'Nick Kennedy' nick-wa5bdu@... [4sqrp]" <4sqrp@...> wrote:


 
Well, I’m not a pilot but some searches indicate I probably meant AMSL or MSL (above mean sea level) as that’s what I was referring to.  The terrain below the the mountain is at about 360’ above seal level, so I was at about 1440’ above ground level I suppose.
 
It’s interesting – I was building a barometer / altimeter a couple years ago using an Ardunio and a pressure transducer.  My source for local barometric pressure to calibrate the thing against were my local power plant which has a computer point I can access and the local airport.  I couldn’t get them to square up even after correcting for minor differences in elevation.  I finally found out that the airport reports the barometric pressure as what it would be if you relocated the airport to New Orleans.  Ha!  They correct it to what the pressure would be at sea level.
 
Yes Phil, there was beer.  At least in my case.  We have a mixture of guys who partake and guys who don’t.  I have to be careful though or I’ll sleep the whole night away.  I managed to get in only about two hours of sleep, so I guess I didn’t over-indulge.
 
73-
 
Nick, WA5BDU
 
 
Sent: Thursday, July 02, 2015 10:49 AM
Subject: Re: [4sqrp] Re: FD reports comments?
 
 
Did you mean AGL or MSL ?

On 7/2/2015 8:24 AM, 'Nick Kennedy' nick-wa5bdu@... [4sqrp] wrote:
 
This was a different Field Day for me.  For the past several decades, I’ve been part of the local club’s effort and usually one half of a two-man team running the CW station.
 
This time, several (eight) old guys who had been QSO partners in the 60s, about 50 years ago, decided to get together for an old friends FD.  Two flew down from Oregon but most came from various locations in Arkansas.
 
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH.  Far from roughing it, we rented two cabins and had the comforts.  My station was outside though.  We ran two 100 watt CW stations, each using 130 foot dipoles fed with ladder line.  They seemed to do a great job.  We used K5ALU, the call of one of our members.
 
We managed 2350 QSOs, about 50 of them on 6 meters and the rest divided between the two HF CW stations.  The weather was excellent and the bugs were few.  Great Field Day.
 
73-
 
Nick, WA5BDU

--
David Martin - K5DCM
Mountain Home, Ar.
-+-+-+-+-+-+-+-+-+-+-
"It's only "work" if you'd rather be doing something else" - Dean Kamen

SCOTUS has legalized perversion, and heathens are celebrating.




Re: FD reports comments?

Nick-WA5BDU
 

Well, I’m not a pilot but some searches indicate I probably meant AMSL or MSL (above mean sea level) as that’s what I was referring to.  The terrain below the the mountain is at about 360’ above seal level, so I was at about 1440’ above ground level I suppose.
 
It’s interesting – I was building a barometer / altimeter a couple years ago using an Ardunio and a pressure transducer.  My source for local barometric pressure to calibrate the thing against were my local power plant which has a computer point I can access and the local airport.  I couldn’t get them to square up even after correcting for minor differences in elevation.  I finally found out that the airport reports the barometric pressure as what it would be if you relocated the airport to New Orleans.  Ha!  They correct it to what the pressure would be at sea level.
 
Yes Phil, there was beer.  At least in my case.  We have a mixture of guys who partake and guys who don’t.  I have to be careful though or I’ll sleep the whole night away.  I managed to get in only about two hours of sleep, so I guess I didn’t over-indulge.
 
73-
 
Nick, WA5BDU
 
 

Sent: Thursday, July 02, 2015 10:49 AM
Subject: Re: [4sqrp] Re: FD reports comments?
 
 

Did you mean AGL or MSL ?

On 7/2/2015 8:24 AM, 'Nick Kennedy' nick-wa5bdu@... [4sqrp] wrote:
 
This was a different Field Day for me.  For the past several decades, I’ve been part of the local club’s effort and usually one half of a two-man team running the CW station.
 
This time, several (eight) old guys who had been QSO partners in the 60s, about 50 years ago, decided to get together for an old friends FD.  Two flew down from Oregon but most came from various locations in Arkansas.
 
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH.  Far from roughing it, we rented two cabins and had the comforts.  My station was outside though.  We ran two 100 watt CW stations, each using 130 foot dipoles fed with ladder line.  They seemed to do a great job.  We used K5ALU, the call of one of our members.
 
We managed 2350 QSOs, about 50 of them on 6 meters and the rest divided between the two HF CW stations.  The weather was excellent and the bugs were few.  Great Field Day.
 
73-
 
Nick, WA5BDU

--
David Martin - K5DCM
Mountain Home, Ar.
-+-+-+-+-+-+-+-+-+-+-
"It's only "work" if you'd rather be doing something else" - Dean Kamen

SCOTUS has legalized perversion, and heathens are celebrating.


Re: FD reports comments?

davemrtn
 

Did you mean AGL or MSL ?

On 7/2/2015 8:24 AM, 'Nick Kennedy' nick-wa5bdu@... [4sqrp] wrote:
 

This was a different Field Day for me.  For the past several decades, I’ve been part of the local club’s effort and usually one half of a two-man team running the CW station.
 
This time, several (eight) old guys who had been QSO partners in the 60s, about 50 years ago, decided to get together for an old friends FD.  Two flew down from Oregon but most came from various locations in Arkansas.
 
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH.  Far from roughing it, we rented two cabins and had the comforts.  My station was outside though.  We ran two 100 watt CW stations, each using 130 foot dipoles fed with ladder line.  They seemed to do a great job.  We used K5ALU, the call of one of our members.
 
We managed 2350 QSOs, about 50 of them on 6 meters and the rest divided between the two HF CW stations.  The weather was excellent and the bugs were few.  Great Field Day.
 
73-
 
Nick, WA5BDU

-- 
David Martin - K5DCM
Mountain Home, Ar.
-+-+-+-+-+-+-+-+-+-+-
"It's only "work" if you'd rather be doing something else" - Dean Kamen

SCOTUS has legalized perversion, and heathens are celebrating.


Re: FD reports comments?

Phil Anderson
 

Nick, that sounds like a lot of fun............probably beer too? Eh>

Unc Phil, Lawrence.

'Nick Kennedy' nick-wa5bdu@... [4sqrp] wrote:


This was a different Field Day for me. For the past several decades,
I’ve been part of the local club’s effort and usually one half of a
two-man team running the CW station.
This time, several (eight) old guys who had been QSO partners in the
60s, about 50 years ago, decided to get together for an old friends
FD. Two flew down from Oregon but most came from various locations in
Arkansas.
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH. Far
from roughing it, we rented two cabins and had the comforts. My
station was outside though. We ran two 100 watt CW stations, each
using 130 foot dipoles fed with ladder line. They seeme d to do a great
job. We used K5ALU, the call of one of our members.
We managed 2350 QSOs, about 50 of them on 6 meters and the rest
divided between the two HF CW stations. The weather was excellent and
the bugs were few. Great Field Day.
73-
Nick, WA5BDU




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Re: FD reports comments?

Dale Putnam
 

That sounds like a great time... one of those special times. Super !!

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 



To: 4sqrp@...
From: 4sqrp@...
Date: Thu, 2 Jul 2015 08:24:17 -0500
Subject: Re: [4sqrp] Re: FD reports comments?

 

This was a different Field Day for me.  For the past several decades, I’ve been part of the local club’s effort and usually one half of a two-man team running the CW station.
 
This time, several (eight) old guys who had been QSO partners in the 60s, about 50 years ago, decided to get together for an old friends FD.  Two flew down from Oregon but most came from various locations in Arkansas.
 
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH.  Far from roughing it, we rented two cabins and had the comforts.  My station was outside though.  We ran two 100 watt CW stations, each using 130 foot dipoles fed with ladder line.  They seemed to do a great job.  We used K5ALU, the call of one of our members.
 
We managed 2350 QSOs, about 50 of them on 6 meters and the rest divided between the two HF CW stations.  The weather was excellent and the bugs were few.  Great Field Day.
 
73-
 
Nick, WA5BDU


Re: FD reports comments?

Nick-WA5BDU
 

This was a different Field Day for me.  For the past several decades, I’ve been part of the local club’s effort and usually one half of a two-man team running the CW station.
 
This time, several (eight) old guys who had been QSO partners in the 60s, about 50 years ago, decided to get together for an old friends FD.  Two flew down from Oregon but most came from various locations in Arkansas.
 
We operated from Mt. Nebo, a 1800 foot ASL mountain near my QTH.  Far from roughing it, we rented two cabins and had the comforts.  My station was outside though.  We ran two 100 watt CW stations, each using 130 foot dipoles fed with ladder line.  They seemed to do a great job.  We used K5ALU, the call of one of our members.
 
We managed 2350 QSOs, about 50 of them on 6 meters and the rest divided between the two HF CW stations.  The weather was excellent and the bugs were few.  Great Field Day.
 
73-
 
Nick, WA5BDU


Wed. night PSK checkins.

Dick Hammond
 

AE5ZZ  Jim,  Little Rock, AR.
KA0KRN David,  Ottumwa, IA.
WF2F  Richard, South Bend, IND.
AC0WZ Dan, Fulton,MO.
Tnx fer checkins, some qrn but acceptable.
Using my FT817 Yaesu, Icom 706 quit tx.in for rep.
N0TGR Dick, Augusta, KS.  NCS


Re: FD reports comments?

Donald Kelly
 

Hi Danny,


After our conversation I was looking for a reason to try simple DSB operation again. FD is always a good time to try things out.


It still amazes me how much fun simple DSB transceivers can be. More than anything I was happy with how the DC receiver worked in the crowded 40M band.

It is based on KK7B, Rick Campbell's, DC receiver designs.


Email me if you need anything for your DSB project.


K5UOS


Wednesday Night 40m Net

dekle@...
 

Only a few tonight.
Thanks to:

N2QFD        Mal        Elmira, NY
WA0PWP    Paul      Stoughton, WI
WN0I           Andy     Jefferson City, MO
KV6Z           Bill        Claremore, OK (NCS)


Thanks everybody
73
Bill
KV6Z




FS: 4SQRP SS-40RX/TX

Jim Sheldon
 

For sale:  Completely built and tested SS40RX/TX in a Circuit Specialists cabinet.  Frequency range as built is 7.016 through 7.039 MHz.  It's putting out a measured 6.8 watts into a 50 ohm dummy load.  The receiver is the older SS40, but the TX has been fully and properly integrated.  It does very close to full QSK switching.  The receiver is really hot, with the minimum discernable signal a measured -132 dBm.  I've added the Freq-Mite freq counter and the RF connector on the back is an SO-239.  There is also an on-off toggle switch on the back panel. 
 
Asking $130 for the whole package, shipped anywhere in the US.  PayPal preferred but I will take a US Postal Service money order.
 
Please email me off the reflector to ask for further info or to tell me you want it.  First "I'll take it" determined by time of receipt of the email gets right of first refusal.
 
Jim Sheldon, W0EB
2029 East Evanston Dr.
Park City, KS 67219-1618
 
Tel: 316-744-3022
 
 
  
 
 
Memo to NSA, DHS, FBI, CIA, DIA, DEA, ATF, KGB, MI5, and any other alphabet soup agencies that might be listening/reading/tracking my email content,  I share this computer with an old lady, an ex-con, a priest, a used car salesman, a military veteran, a pacifist, a vegetarian, a hunter, a circus midget, a local politician, a doberman and a demented cat...so any data you collect from me will be meaningless, random and therefore useless...good luck.
 


Re: FD reports comments?

Dan Reynolds
 

Cool Don. I can't wait to try your design sometime. Still throwing around the idea of a DSB kit to pitch to the group...


Re: FD reports comments?

Dan Reynolds
 

Our local club did pretty good - for us. When I joined the club about 7-8 years ago they hadn't done anything for field day for years. Typical lack of support (who's going to do it?). 
I instituted a "shortened" field day and threw in a potluck at the end of the day, Saturday, that way I could be assured of some attendance. Everyone comes for food.
No overnight, no campers, tents, etc... Just go to a good local park and have at it.
It was total selfishness on my part. I wanted to know what field day was all about and I wanted an excuse to operate in a park. I admit it. 
So, that's what we've done these last few years.
Of course there's a vocal contingent that say, "that's not the way we used to do it in the good old days." Of course they NEVER EVER do anything anymore.
Enough of the soap box. Well that particular soap box anyway.

We had four complete HF stations setup. All had good antennas. Very nice setups. Had a Honda generator (man, aren't those things nice?). Batteries and I used Li-po's this year. I have a very good friend who flies small, medium & large RC helicopters. Because he doesn't like his batteries getting stale I get his old ones - which for radio use are ideal. And he has given me several of his older chargers as well. These batteries are 2200 mAH. I used two batteries Saturday - not because I had to. Just swapped them out.

I ran the FT-817 my main rig. I don't own a 100 watt rig. I made more contacts and had the farthest contact. I got a KH6 Saturday. I ran on 15 meters all day. Oh and SSB only.
The 817 is a great rig but on 20 meters I just don't have the filters for a field day effort. There are too many stations too close together. 
Antenna was a 40 meter OCF dipole / windom. Home made.

We all had a blast and I left a lot of them scratching their heads about that QRP crap.


Wed night and Thurs morn Nite Nets

WA0ITP
 

I'll be at my daughter's tonight and tmrrw morning and won't be able to call the nets. Pse someone jump in and call them.

Thanks.

--
72 WAØITP
I love this radio stuff.
www.wa0itp.com
wa0itp@wa0itp.com


Re: Need - DB9 male connector

Dale Putnam
 



Thankyou all for being so generous,
I have one coming, actually two..
after I asked, I realized I need two.  Isn't that the way it always works?
Thank you Bill and Pat!!

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 


FOXHUNT Summer Season opener!!

Dale Putnam
 

The Game Warden, has done due diligence... and finally buckled to extreme pressure,
has agreed to allowing the FOXHUNT to proceed this Thursday, in the 20 acre wood.
The commencement celebration will kick off at 0100z Friday morning (GMT) or 7pm MT Thursday evening,
somewhere between the two trees - 14.050 and 14.070... with two outstanding FOX to be pursued,
caught, and de-pelted. De Pelts consist of exchanging RST SPC (state, providence, or country) op name and power
all this is to be accomplished with 5watts or less.  Sometimes much less... but if an insurance or LOW PWR pelt is
requested, please be use courtesy, and avoid taking FOX time when other Hounds haven't tree'd him yet.

If you want to check up the official rules.. click on - http://www.qrpfoxhunt.org/summer_rules.htm
and when you get a chance, say thanks to the Colorado Qrp Club for all their support!!

May the Prop Princess smile upon us all!!

Have a great hunt,
 
 
--... ...-- Dale - WC7S in Wy


Re: Need a DB9 male connector

Don Wilhelm <w3fpr@...>
 

Dale,

Send me your address and I will send you one.� It may or may not have the cable nor the backshell, but I do have the connector.

73,
Don W3FPR


On 6/30/2015 7:21 PM, Dale Putnam daleputnam@... [4sqrp] wrote:
�

Need.. a DB9 male connector.�� IF it is molded to a cable.. the cable closest to the connector
needs to be good. If it has about 6 inches of cable.. that would be great.
.. Yes.. I went to the local RS.. yes they carry it.. no it isn't in stock...
Yes, I could order one.. ... ...� but if you have an extra one, why not from you?
Thank you,

Have a great day,
�
�
--... ...-- Dale - WC7S in Wy

Have a great day,
�
�
--... ...-- Dale - WC7S in Wy
�
�


Need a DB9 male connector

Dale Putnam
 

Need.. a DB9 male connector.   IF it is molded to a cable.. the cable closest to the connector
needs to be good. If it has about 6 inches of cable.. that would be great.
.. Yes.. I went to the local RS.. yes they carry it.. no it isn't in stock...
Yes, I could order one.. ... ...  but if you have an extra one, why not from you?
Thank you,

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 

15541 - 15560 of 24775