Just for the sake of QRPoMeter builders, I have changed the calibration procedure in the past year, so that may be the source of confusion. And the 4SQRP kits are different from the NM0S kits. It is n

This has been spoken for - thanks to all who showed interest. W0EB

Thanks all, i tried the calibration given by Glenn, but can’t get anywhere near 1.0, more on the order of 10-13. My kit actually has 3 test points. The 5v for 33 was fine. But the second step is to re

You're right Dan. I'll add that to the manual as Appendix N and Ron will post that update as soon as he can. Jim, N5IB

Great additional info, Jim, Thanks. This stuff should be in the manual.

Absolutely, it helps! Thanks loads, John!

Hi Dan, Get on the Bayou Jumper group https://4sqrp.groups.io/g/BayouJumperKit and look at message #2308 Jim, N5IB

The inside dims of the HL box bottom: 7.30 x 4.875 x 2.10 The cover is .875 deep. The Main circuit board : 7.25 x 4.82 Corner cut outs approx .400 All dims in inches. Hope this helps. John KK4ITX Visi

I'm trying to find the exact dimensions of the BJ PCB and face boards as well as heights of knobs, etc and depth into cabinet. Hoping to get one of the next batches of the BJ and want to get ahead of

Did not know that anyone was making a list, but you can add my name to it. Had to take a short vacation from the build due to the weather and the fact that my bench is outside in the TX room But our w

My QRPometer doesn't seem to have a TP2, at least it isn't mentioned in the calibration instruction: Step 8 – Calibration There is one test point on the board, above the TX connector. This is labeled

Ge Karen The Qrp o meters have a history of needing a lot of heat on the load resistors. Try cranking up the heat to high, then reflow them and let em soak. It’s worth a try. 72 Johnny ACØBQ

Might try a different QRP transmitter of known power level to verify the readings. 73 de n4mj//glenn “PLEASE REMOVE all email addresses before you send it on and use BCC option when forwarding" Thank

If anyone is looking for a nice little single band QRP rig, I have a QCX-Mini (version 1 but with the self destruct repair modifications installed and everything is working great) for 40 meters. I fin

I'd like a soup’er up’er as well. Thanks. Best regards, Gary, K7EK ---

Please add me to the list for Soup’er Up’er., or at least the bare board. Thanks, .Ken Ken Cone kencone@... K7BXI

Hi, I recently completed this kit adjustment of TP-1 to 5v is fine. But calculation of power from TP-2v gives 9.5w with KX3 set to 5w. Doesn’t seem right. I adjusted the display anyway, and it fluctua

Add me to the list for the soup’er up’er. I’m just completing my BJ. Tom KT4XN Sent from Mail for Windows 10

Dan, What is a Soup'er Up'er? EuGene, KA5NLY

Hoping to order a BJ in the next round. And add me to the list for a Soup'er Up'er, or at least the bare board.