What condition is the Atlas 120 in?

I’ve noticed with mine that you can sometimes get a deeper null in tuning with a different letter setting on the dial. Be sure to try tuning the same band/antenna using a letter close to what you are

This makes great sense to me. There are many micro pots available so look for one small enough to fit inside the case. Great idea. David J. Wilcox’s iPad

Did some more testing. 5W input. With 50 ohm dummy load, can get red LED to almost go out which corresponds to almost no reflected power confirmed with independent meter. Detuning slightly shows red L

qrpme is 500mw, Super rockmites are 2-3 watts.

NM0S: Yes, green LED does go to full brightness. WB3BNO: That's kind of what I thought might be a good option. I will have to try that.

Well the 40 meter CW Net was pretty tough here tonight, signals were weak hear tonight with lots of QRN 40 meters N4ELM DAVE WI5H CURT 80 meters was much better here 80 METERS N4MJ GLENN WA0ITP TERRY

Wednesday Evening 40 and 80 meter Nets When: Wednesday, 3 March 2021 20:00 to 21:00 (GMT-06:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net wil

#cal-notice

40 meter crystal. I have no idea of how they compare. This one is the Chinese SuoerRockmite. Lots if info out there on it.

What band is the Rockmite for? I am interested in it. How does it compare to the Rockmite kits available here at qrpme.com?

Cyclone and MFJ1699 are spoken for. Jess AE0CW

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 3 March 2021, 20:00 to 21:00, (GMT-06:00) America/Chicago Where:40 and 80 Meters View Event Organizer: jomatlock@... Description

#cal-reminder

My bad. Rockmite $15? Only have wall wart for one of the Alinco HTs but have charging base. Should be easy to source from a junk drawer. Jess AE0CW

Excess to my needs and I “need” a 3D printer😆 Comet Duplexer 440-HF used with my ATAS120 and FT857D $25.00 Two Alinco miniature HTs. One C5 dual band One C4 UHF 420-460 Chargers and speaker mikes $35

I had a similar problem with mine. I solved by connecting a 5k trim pot across the red led. With the tuner feeding a 50 ohm dummy load and adjusted for maximum dimming of the red led, I adjusted the p

I'm at work so I don't have time to look at the schematic but from the description it sounds like the current limiting resistance on the Red L.E.D, or the cutoff current of that L.E.D, is too low. L.E

I have a similar issue. I can get the green LED to full brightness, but at best (even at almost 1:1 SWR according to other gauges) the red only gets dimmer. It doesn’t turn off or even “fully” dim. I’

I have the same issue and I can get the Green very bright most of the time, but at best red only dims. Bob KG5GTE

Is your green LED ever coming on to full brightness?

Ge Group I will be attending my monthly Civic duties tomorrow night. Please listen for Bert, N0YJ as your NCS. He is going to try out his new IC 705. 72 Johnny ACØBQ

#cal-reminder