Topics

Pig Rig


John C. Demuth - K8CQA
 

Terry,
Thanks for the label!
When I mentioned using a 14-pin IC socket cut in half, I should really have
said "cut into quarters", meaning cutting across through pins #4 & #11, and
being cut lengthwise right through the middle (and trimmed as needed to
yield 4 socket sets of 3 pins each).

-----Original Message-----
From: WA0ITP [mailto:wa0itp@mchsi.com]
Sent: Sunday, March 10, 2013 10:40 AM
To: k8cqa
Subject: Re: [4sqrp] Re: Pig Rig

Hee, good one John,

Label attached. Printing it on colored paper makes it look much better
than on
white. I like yellow (no surprise there :o) but some builders have used
other colors. Light gray and light blue both look very nice too.

----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com



----- Original Message -----
From: "k8cqa" <demuthent@roadrunner.com>
To: "WA0ITP" <wa0itp@mchsi.com>; <4sqrp@yahoogroups.com>
Sent: Saturday, March 09, 2013 11:52 PM
Subject: [4sqrp] Re: Pig Rig



Terry,

This little pig went to OzarkCon,
This little pig stayed home;
This little pig ate roast beef,
This little pig had none.
And THIS little pig went whee, whee, all the way home, was fed a proper diet
of
juice (the 12VDC kind), and her voice was heard throughout the land ...

Suckling pig #178 exited the mailbox in Gnadenhutten OH on Friday March 08
2013
and the appropriate slap on the backside (with a soldering pencil, of
course!)
will commence in the very near future.

I would appreciate a label if possible; March 2013 would be fine.

Thanks also for all the crystal socket ideas. A 14-pin machined pin IC
socket
could be cut in half at the center pins, yielding four 3-pin sockets ...
just
right for one rig if the center pin of the 3-pin socket is used for ground
as
per some of the ideas and pics at
<http://www.w5usj.com/images/bandchangemods.pdf>; and
<http://www.w5usj.com/images/crystalgrounding.pdf>; ...

Now back to tending the suckling pig ...

72 de John - K8CQA


John C. Demuth - K8CQA
 

Terry,

This little pig went to Ozarcon,
This little pig stayed home;
This little pig ate roast beef,
This little pig had none.
And THIS little pig went whee, whee, all the way home, was fed a proper diet of juice (the 12VDC kind), and her voice was heard throughout the land ...

Suckling pig #178 exited the mailbox in Gnadenhutten OH on Friday March 08 2013 and the apapropriate slap on the backside (with a soldering pencil, of course!) will commence in the very near future.

I would appreciate a label if possible; March 2013 would be fine.

Thanks also for all the crystal socket ideas. A 14-pin machined pin IC socket could be cut in half at the center pins, yielding four 3-pin sockets ... just right for one rig if the center pin of the 3-pin socket is used for ground as per some of the ideas and pics at http://www.w5usj.com/images/bandchangemods.pdf and http://www.w5usj.com/images/crystalgrounding.pdf ...

Now back to tending the suckling pig ...

72 de John - K8CQA

--- In 4sqrp@yahoogroups.com, "WA0ITP" <wa0itp@...> wrote:

Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com



----- Original Message -----
From: CStratton
To: 4sqrp@yahoogroups.com ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig





Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.


Chip

AE5KA




On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson <blawson2@...> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links


dnorbury
 

The enthusiasm for this rig is fantastic! I haven't been rock-bound for a long, long time but it really brings back some great memories (and some really frustrating ones!). I just ordered the kit which looks like a great deal and hope to catch a lot of you on the air.

72/73, Dave, KD6A

--- In 4sqrp@yahoogroups.com, "WA0ITP" <wa0itp@...> wrote:

http://kitsandparts.com/

----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com



Rick Bennett
 

That is too funny.  The flu hasn't quite made it to my shack yet, but I think it is pretty contagious...

de KC0PET, Rick


 

I guess it could be called the 4 State Swine Flu!! 

My construction starts this weekend I hope!
72
Johnny AC0BQ


On Friday, March 1, 2013, wrote:
 

jump, jump, jump!!  ;-)
 
Randy_KB4QQJ
 
In a message dated 3/1/2013 9:36:43 A.M. Eastern Standard Time, wayne.dillon@... writes:
 

This PigRig thing is getting infectious, well maybe I'm gonna jump as well, hmmmm...

God Bless de Wayne - KC0PMH


WA0ITP
 

 
----------------------------------
I love this radio stuff !
72   WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com
 
 

----- Original Message -----
From: Dg Arnholt
Sent: Friday, March 01, 2013 6:23 PM
Subject: Re: [4sqrp] Pig Rig

guys i cant find the info to check out the pig rig.. i might buy it and ship to our friend in wyoming that wat i know it will work.. lol if i tried it.. well the results may not be what i wanted..glad we have techs in the group that will assist..
 

From: David Martin <davemrtn@...>
To: 4sqrp@...; 4sqrp@...; WA0ITP <wa0itp@...>
Sent: Friday, March 1, 2013 9:46 AM
Subject: Re: [4sqrp] Pig Rig

Doggone you guys !!!!
All this hubbub about the pig-rig.......  I had to order one.....  just clicked paypal !!!!

--
David Martin - K5DCM - Mountain Home Ar.



Quoting WA0ITP :
 
Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
http://www.wa0itp.com/
http://www.4sqrp.com/
http://www.qrpspots.com/

----- Original Message -----
From: CStratton
To: mailto:4sqrp%40yahoogroups.com ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig

Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.

Chip

AE5KA

On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson mailto:blawson2%40cox.net> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links




Dg Arnholt <dgarnholt@...>
 

guys i cant find the info to check out the pig rig.. i might buy it and ship to our friend in wyoming that wat i know it will work.. lol if i tried it.. well the results may not be what i wanted..glad we have techs in the group that will assist..
 

From: David Martin
To: 4sqrp@...; 4sqrp@...; WA0ITP
Sent: Friday, March 1, 2013 9:46 AM
Subject: Re: [4sqrp] Pig Rig

Doggone you guys !!!!
All this hubbub about the pig-rig.......  I had to order one.....  just clicked paypal !!!!

--
David Martin - K5DCM - Mountain Home Ar.



Quoting WA0ITP :
 
Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
http://www.wa0itp.com/
http://www.4sqrp.com/
http://www.qrpspots.com/

----- Original Message -----
From: CStratton
To: mailto:4sqrp%40yahoogroups.com ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig

Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.

Chip

AE5KA

On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson mailto:blawson2%40cox.net> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links




Wendell Morrill
 

Just wait... you can't build just one.
Rigs 20 and 93.

Wendell
N7WM

You guys gonna keep Diz busy packaging up stuff this weekend :)

Mike-WE0H


Mike-WE0H
 

You guys gonna keep Diz busy packaging up stuff this weekend :)
Mike-WE0H


Johnny AC0BQ
 

I guess it could be called the 4 State Swine Flu!! 
My construction starts this weekend I hope!
72
Johnny AC0BQ


On Friday, March 1, 2013, wrote:
 

jump, jump, jump!!  ;-)
 
Randy_KB4QQJ
 
In a message dated 3/1/2013 9:36:43 A.M. Eastern Standard Time, wayne.dillon@... writes:
 

This PigRig thing is getting infectious, well maybe I'm gonna jump as well, hmmmm...

God Bless de Wayne - KC0PMH


kb4qqj
 

jump, jump, jump!!  ;-)
 
Randy_KB4QQJ
 

In a message dated 3/1/2013 9:36:43 A.M. Eastern Standard Time, wayne.dillon@... writes:
 

This PigRig thing is getting infectious, well maybe I'm gonna jump as well, hmmmm...

God Bless de Wayne - KC0PMH


W0IIT
 

Hey Guys and Gals,

It is official, it has become an epidemic:-) If this keeps up the 4State qrp Group just might become the largest single group of Pig Riggers!!!!

Oink Oink

cu es 72, Bart W0IIT
Pittsburg, KS
FP #11
4Sqrp #72


Ozark QRP Banner <ozarkqrpbanner@...>
 

Well, count me in also. Bet 7.030.7 MHz may see a surge in use!
73....Walter . K5EST


WA0ITP
 

It's the world's most stable frequency counter :o)
 
----------------------------------
I love this radio stuff !
72   WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com
 
 

----- Original Message -----
Sent: Friday, March 01, 2013 8:37 AM
Subject: Re: [4sqrp] Pig Rig

Love the pseudo digital digital display, waaay cool.
Wayne - KC0PMH

On Fri, Mar 1, 2013 at 8:35 AM, <w2bpi1@...> wrote:
 

I would like that label. I am on with my piggy now!  George/W2BPI
 
In a message dated 3/1/2013 9:32:07 A.M. Eastern Standard Time, wa0itp@... writes:
 

Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com

----- Original Message -----
From: CStratton
To: 4sqrp@... ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig

Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.

Chip

AE5KA

On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson blawson2@...> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links




--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-C #11504
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155
SOC #848
30MDG#1176
NEQRP #693
GORC #192


davemrtn
 


Mike-WE0H
 

I had to stare at those pictures yesterday until I figured out it was an image not a actual freq counter :)
Mike-WE0H


Wayne Dillon
 

Love the pseudo digital digital display, waaay cool.
Wayne - KC0PMH


On Fri, Mar 1, 2013 at 8:35 AM, <w2bpi1@...> wrote:
 

I would like that label. I am on with my piggy now!  George/W2BPI
 
In a message dated 3/1/2013 9:32:07 A.M. Eastern Standard Time, wa0itp@... writes:
 

Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com

----- Original Message -----
From: CStratton
To: 4sqrp@... ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig

Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.

Chip

AE5KA

On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson blawson2@...> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links




--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-C #11504
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155
SOC #848
30MDG#1176
NEQRP #693
GORC #192


George H. Gates
 

I would like that label. I am on with my piggy now!  George/W2BPI
 

In a message dated 3/1/2013 9:32:07 A.M. Eastern Standard Time, wa0itp@... writes:
 

Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com

----- Original Message -----
From: CStratton
To: 4sqrp@... ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig

Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.

Chip

AE5KA

On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson blawson2@...> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links


Wayne Dillon
 

This PigRig thing is getting infectious, well maybe I'm gonna jump as well, hmmmm...
God Bless de Wayne - KC0PMH


On Fri, Mar 1, 2013 at 8:30 AM, WA0ITP <wa0itp@...> wrote:
 

Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WAØITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com

----- Original Message -----
From: CStratton
To: 4sqrp@... ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig

Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.

Chip

AE5KA

On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson blawson2@...> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links




--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-C #11504
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155
SOC #848
30MDG#1176
NEQRP #693
GORC #192


WA0ITP
 

Hee, they are a lot of fun. Being rock bound brings back memories of my novice
days. Man, that was loong time ago.

If you use the Ten Tec TP-19 enclosure, I'll be happy to send you a label with
your call and build date on
it. A picture of mine in the TPC-19 is here, http://www.wa0itp.com/index.html
I do like the charcoal color. The TP-19 dimensions on the Ten Tec web site
differ from the one I purchased. Mine is 2" x 4.75" x 4" and the PigRig fits
perfectly. http://www.wa0itp.com/pigrig3b.jpg

Changing freqs,say to go to 7122 for Wayne's nets, will require 4 xtals. Three
for the rcvr front end filter, and 1 for the local oscillator. Diz has crystals
as well as ESS.

oo
----------------------------------
I love this radio stuff !
72 WA�ITP
www.wa0itp.com
www.4sqrp.com
www.qrpspots.com

----- Original Message -----
From: CStratton
To: 4sqrp@yahoogroups.com ; Bart Lawson
Sent: Friday, March 01, 2013 8:04 AM
Subject: Re: [4sqrp] Pig Rig





Shame on you guys. Made me order one too, though it has bounced around in the
back of my mind since hearing Terry on his one day this winter.


Chip

AE5KA




On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson <blawson2@cox.net> wrote:

Joe, et al,

Caught the fever and ordered mine yesterday. Hopefully, I will get mine built
and on the air, handing out #11. I have not been active in the club but hope
this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links


random.path
 

Shame on you guys. Made me order one too, though it has bounced around in the back of my mind since hearing Terry on his one day this winter.

Chip
AE5KA


On Fri, Mar 1, 2013 at 7:30 AM, Bart Lawson <blawson2@...> wrote:
Joe, et al,

Caught the fever and ordered mine yesterday.  Hopefully, I will get mine built and on the air, handing out #11.  I have not been active in the club but hope this little rig will spur me on!!!

cu es 72, Bart W0IIT
Pittsburg, KS

------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 5-6 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/4sqrp/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/4sqrp/join
    (Yahoo! ID required)

<*> To change settings via email:
    4sqrp-digest@...
    4sqrp-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    4sqrp-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/