Cyclone 40 PTO Coil Form
|
Clark WU4B
I'm building s/n 201 and do not have the coil form. What is the diameter as I will have to fabricate one here.
Thanks for all your help -- 72, Clark WU4B
|
|
|
|
Thomas Martin
You may want to check “thingverse” website 3D printing site look under Ham Radio someone may have one listed many talented people there.
toggle quoted messageShow quoted text
Tom
On Sunday, November 22, 2020, Clark WU4B <clark.macaulay@...> wrote: I'm building s/n 201 and do not have the coil form. What is the diameter as I will have to fabricate one here.
|
|
|
|
John
Looks very much like a 1/4" nylon standoff John K5MO
On Sun, Nov 22, 2020 at 5:40 PM Thomas Martin <tem494@...> wrote: You may want to check “thingverse” website 3D printing site look under Ham Radio someone may have one listed many talented people there.
|
|
|
|
Curt
If you have any doubts email the designer NM0S for help.
I treasure my own Cyclone, best simple rig in my experience. 73 curt
|
|
|
|
AG1P Ron
Here’s what is in the BOM - 0.5” OD x 0.75” 10-32 Nylon Spacer
72 - Ron - AG1P 4SQRP Volunteer Webmaster
From: main@4SQRP.groups.io [mailto:main@4SQRP.groups.io] On Behalf Of John
Looks very much like a 1/4" nylon standoff
John K5MO
On Sun, Nov 22, 2020 at 5:40 PM Thomas Martin <tem494@...> wrote:
|
|
|
|
Clark WU4B
Ron, Thanks for the two posts. Woke up this morning and wondered if I had the BOM as a separate document as it is not in my copy of the manual. Funny how I think better after a good night’s sleep!
On Mon, Nov 23, 2020 at 12:23 AM AG1P Ron <ag1p@...> wrote:
--
72, Clark WU4B
|
|
|