From the emails I've been getting off list, some of you didn't completely read my post referencing Terry's stating that Elecraft will have a presence at OzarkCon. There will be no Elecraft employees t

Are the launchers aware that the 20m qrp cw beacon may be impossible to hear on Saturday due to the ARRL DX contest going on at that time? Sorry to be the bearer of bad news, cuz I was looking forward

Hi folks, The late 40m net will take place on or around 7.122 at 02:30z I stood in for Terry on the early 80m net and had a blast, Thanks to all who called in, I'll post the results early AM tomorrow,

Hello all, just checking in and testing my email settings. Looking foreward to another great Ozarkcon. Joel-KB5FCF

Sorry for not paying attention to the "To:" line. Will have to get used to the yahoo protocol. 72, Sam, AL7V

Changes for this week only: I will be calling the 01:00z 80m net while Terry journey's back from Branson and will continue with it until 02:00z, Terry should be back by then, If we get through with th

Ge all. For those who missed the e-mail it was my privelage to stand in for Terry on the early 80m net tonight. He is/was on his way back from Branson and would be calling the late net. As it turned o

Welcome to the RMR net today, with snow on the way, and the wind up.. again. I will be using my temp antenna, that is 20 foot at the apex, and hopefully be able to use relays too. Drop by, say hi. Hav

I found this posted on the AMRAD list this morning. It is an excellent way to wind toroids! http://www.youtube.com/watch?v=GT44U10WqRA 73 Dave NM0S

Ge group: Looks like I made the cut over! Thanks Don for all of you efforts to keep our QRP chatter moving, I am sure yahoo will be ok for us, works well with several other groups! 72 Johnny AC0BQ

Hello folks: This is your reminder that the February 4SQRP luncheon gathering will be this upcoming Saturday, the 16th, at the Country Kitchen in downtown Seneca, MO. Lunch will be at 11:00 AM. There

The IHAB Balloon Launch from the lawn of Rockwell Collins in Cedar Rapids, IA will be carrying a 20M beacon built by Dave Cripe, NM0S. Due to the CW DX contest monopolizing the lower end of the band,

As a recent joiner of 4SQRP, I'm looking forward to getting back into building my own stuff. The NS-40 seems to be a popular and well designed rig, and my plan is to use my FT-857 for the RX side. Oth

569 @ 10:29 AM EST in Williamson, NY 14589 72 George/W2BPI

The launch took place at 9AM CST as planned. The CW beacon is working well I have it at abt 569 on 14.323.5. The GPS isnt working at this point in the flight, so there is no tracking available. If it

I'm posting this so you dont spend continue to look for the IHAB9 Beacon on 14.323. The launch was at 1500z and the beacon worked well until 1553z when it developed a chirp, then it failed at 1615z. T

Anybody have an answer for this fellow? See you all at Ozarkcon. Tim WB9NLZ ----- Forwarded Message ----- From: Charles Hooker To: editor@... Sent: Saturday, February 9, 2013 12:21 PM Subject: Mechani

David, Issues or questions related to the 'e-mail reflector' should be sent to AE5K. To all, please notice the "Contact Us" button on the 4sqrp web page. this will help the correct person when help is

None, they both need patience ;-) I just assembled the Hendricks 41 dB Attenuator and made some remarks: http://hajos-kontrapunkte.blogspot.de/2013/02/hendricks-fabulous-41db-step-hf.html The reason,

I'm curious... For those involved in the 4SQRP kit development, what do you use for your schematic capture and PC board CAD program? I'm investigating Eagle and DipTrace currently, and am decideding I