When those 7122 crystals start getting out to us, installed and operating: Are there any other component changes necessary to the frequency change? Thanks, Bob - K6KL

Just finished a QSO with KY0O on 7.0307 in Kansas City - he on his HW9. I sent him to the Pig Rig site, he was not familiar with it. Putting out between 3 and 4 watts he gave me a 599. Thanks to Terry

Here are some pics of my 20M SST. I got the kit but no case, so I decided to put it into a computer A/B switch box case. http://i241.photobucket.com/albums/ff99/n2uhc/SST-1_zps6d8a6d9c.jpg http://i241

Two feet of snow here in Colo. A blessing really as we desperately need the moisture. Even the 4WD could not get out Saturday, so a great day to build and get on the air. Built another NS-40 sat and p

Thought I would forward this little adventure from Saturdays Polar Bear Moonlight Madness Event. have a great week everyone... 72/73/Scotty/NUØS -------- Original Message -------- Subject: [PolarBearQ

Looks like it has been a good dat to build all over the 4 state area. About 2" here on the ground, none in the streets. Working on installing an HPM in an Altoids along with a switch, battery, jacks,

Good evening gang. Well, we got plenty of snow here in central Illinois. In between other projects and naps I've been thinking about some different projects. Any suggestions for a moderately simple tr

Hey guys, I am dug out here in Humboldt. I went to the campus with my crew moving snow. There was 6 inches on the flat and some 4 foot drifts. We got most of it cleared and called it a day... I'm goin

Put me down for two. You can't just eat one. :-) chuck, k7qo

OzarkCon 2013 is upon us. Preregistration is now closed, the badges are being made, and the packets are being filled. If you missed pregregistion, not to worry, the registration booth in the lobby wil

Can you tell me a bit more about the utility board?

This link is to a WW2 Navy training film teaching proper straight key technique. It has helped me but I've still got a long way to go to catch up with the sailors in the film. http://www.youtube.com/w

http://www.ebay.com/itm/UNBUILT-HEATH-KIT-Model-HW-7-QRP-CW-TRANSCEIVER-/271176032365?pt=US_Ham_Radio_Receivers&hash=item3f2359e06d wow....mighty tempting. 73 Dave NM0S

I'm building the FP rig. The instructions call for U5 as an LM317L. There is no location and no IC of that description. Is that a typo in the instructions? 73 Steve

I thought it was sold but the PayPal funds never arrived.... I have a PicoKeyer-Plus memory keyer that I am not using. Excellent condition. I can send a pix. $20 shipped conus. Milan K9HDX

Did we decide on a repeater or simplex 2m frequency in Branson for Ozarkcon? I remember some talk a while back but I don't remember if anything was decided. -- Tom Sevart N2UHC St. Paul, KS

From: Arnie Grubbs ; To: 4sqrp@... <4sqrp@...>; Subject: Ozarkcon 2m freq Sent: Tue, Mar 26, 2013 10:32:47 PM . Sounds like a good plan.. Joe K0NEB and I will be heading down on Thursday. Should be th

Greetings, Finally finished inventorying Pig Rig #204 parts tonight so this is a good night for me. 72/73, Lou, N8LA

Has anybody measured the impedance of the toroids used in the PigRig? The binocular toroid is driving me crazy. I think I have it correct now, but I would sure like to verify it with an impedance read